esp32-development
From the author
Build, configure, flash, test, debug, and recover firmware for ESP32-family boards, including ESP-IDF C/C++, Arduino/PlatformIO, MicroPython, CircuitPython, ESPHome, Zephyr, Rust, and NuttX. Use when identifying an ESP32 board, choosing a framework, wiring GPIO or peripheral buses, integrating sensors or actuators, diagnosing serial/boot/power/network failures, planning OTA and production security, or automating hardware tests and fault injection. Do not use as a substitute for the exact board schematic, SoC datasheet, or attached component datasheet.
Install
npx skills add magnus919/agent-skills --skill esp32-development -a claude-code
Installs to .claude/skills/esp32-development/ · Each command fetches the skill straight from GitHub with the open skills CLI.
Byte-identical to the scanned commit, with the repository’s licence and a SOURCE.txt.
Want your agent to suggest skills while you type? See how to use skills from your IDE.
Safety checks on SKILL.md
- Ships scripts we have not reviewedLow
Why 78
aiqbench computes the trust score from public signals. It is not a security audit, so read a skill before you install it.
Similar skills
Closest to this one by what they do and when they are used.
- ESPHometonylofgren/aurora-smart-homeESPHome device configuration, firmware, and IoT product development. Covers ESP32, ESP32-S3, ESP32-C3, ESP32-C6, ESP32-H2, ESP32-P4, ESP8266, RP2040, RP2350, nRF52, LibreTiny, Shelly, Sonoff, Tuya, BLE proxy, Matter firmware, Thread, Zigbee, GPIO, sensor YAML, LVGL displays, LED strips, voice assistant hardware, device flashing, Arduino conversion, alarm_control_panel, lock, valve, media_player, microphone, speaker, audio DAC, event entities, datetime entities, Z-Wave proxy, MIPI DSI displays, and DLMS smart meters. Also covers designing new ESPHome-based products: hardware selection, component sourcing, PCB design (KiCad), enclosures, 3D printing, CE/FCC certification, BOM optimization, and manufacturing from prototype to production scale.Design★ 108
- embedded-iottravisjneuman/.claudeEmbedded systems firmware, microcontrollers (ESP32, STM32, Arduino, Raspberry Pi), RTOS (FreeRTOS, Zephyr), IoT protocols (MQTT, CoAP, BLE), bare-metal C/C++, and hardware peripheral interfaces (I2C, SPI, UART, GPIO). Use when developing firmware, working with microcontrollers, or building IoT devices.Other★ 106
- embedded-systemsJeffallan/claude-skillsUse when developing firmware for microcontrollers, implementing RTOS applications, or optimizing power consumption. Invoke for STM32, ESP32, FreeRTOS, bare-metal, power optimization, real-time systems, configure peripherals, write interrupt handlers, implement DMA transfers, debug timing issues.Writing★ 12.1K
- agent-embedded-developertravisjneuman/.claudeSpecialist subagent: Embedded systems, firmware, RTOS, microcontrollers (STM32, ESP32, Arduino), IoT, and bare-metal C/C++ specialist. Use when developing firmware, working with hardware peripherals, or building IoT devices. Trigger phrases: embedded, firmware, RTOS, microcontroller, Arduino, ESP32, STM32, IoT, bare-metal, I2C, SPI, UART, FreeRTOS, Zephyr.Planning★ 106
- m5-onboardthevibeworks/claude-code-docsEnd-to-end onboarding for a freshly-plugged-in M5Stack ESP32 device (Cardputer, Cardputer-Adv, Core, CoreS3, Stick) — detect on USB, flash UIFlow 2.0 firmware, and install the Claude Buddy MicroPython app bundle. Use whenever the user plugs in or wants to flash/provision/reset an M5Stack or ESP32 board, or says "m5-onboard go".Other★ 160
- embedded-project-governancecrichars/embedded-project-governanceA lightweight, risk-scaled workflow for AI-assisted embedded firmware development. Use when onboarding an embedded project, investigating or implementing firmware changes, working around generated code, handling shared interfaces, protocols, Flash/NVM, boot, DMA, ISR/RTOS concurrency, hardware bring-up, recovery, or target verification. Supports minimal user input and structured Issue-style tasks.Finance★ 88
Ratings & reviews
—
no reviews
Tried this skill? Rate it to help others. Sign in
Discussion
Join the discussion. Sign in