m5-onboard
From the author
End-to-end onboarding for a freshly-plugged-in M5Stack ESP32 device (Cardputer, Cardputer-Adv, Core, CoreS3, Stick) — detect on USB, flash UIFlow 2.0 firmware, and install the Claude Buddy MicroPython app bundle. Use whenever the user plugs in or wants to flash/provision/reset an M5Stack or ESP32 board, or says "m5-onboard go".
Install
npx skills add thevibeworks/claude-code-docs --skill m5-onboard -a claude-code
Installs to .claude/skills/m5-onboard/ · Each command fetches the skill straight from GitHub with the open skills CLI.
Download .zip
Byte-identical to the scanned commit, with the repository’s licence and a SOURCE.txt.
Want your agent to suggest skills while you type? See how to use skills from your IDE.
Safety checks on SKILL.md
- Uses sudoLow
Why 82
Security95
Provenance66
Maintenance100
Licence100
Adoption38
aiqbench computes the trust score from public signals. It is not a security audit, so read a skill before you install it.
Similar skills
Closest to this one by what they do and when they are used.
- cardputer-buddythevibeworks/claude-code-docsIterate on the Cardputer-Adv MicroPython app bundle (Claude Buddy, Snake, Hello) after the device is already provisioned via m5-onboard. Use when the user wants to add a new app, push a single changed .py without re-flashing, watch device serial logs, or run a one-shot REPL command. Trigger on "add an app", "push to the cardputer", "tail the device", "run on the device", or follow-up work after /maker-setup.Other★ 160
- esp32-developmentmagnus919/agent-skillsBuild, configure, flash, test, debug, and recover firmware for ESP32-family boards, including ESP-IDF C/C++, Arduino/PlatformIO, MicroPython, CircuitPython, ESPHome, Zephyr, Rust, and NuttX. Use when identifying an ESP32 board, choosing a framework, wiring GPIO or peripheral buses, integrating sensors or actuators, diagnosing serial/boot/power/network failures, planning OTA and production security, or automating hardware tests and fault injection. Do not use as a substitute for the exact board schematic, SoC datasheet, or attached component datasheet.Security★ 147
- embedded-iottravisjneuman/.claudeEmbedded systems firmware, microcontrollers (ESP32, STM32, Arduino, Raspberry Pi), RTOS (FreeRTOS, Zephyr), IoT protocols (MQTT, CoAP, BLE), bare-metal C/C++, and hardware peripheral interfaces (I2C, SPI, UART, GPIO). Use when developing firmware, working with microcontrollers, or building IoT devices.Other★ 106
- ops-speedupdavepoon/buildwithclaudeCross-platform, hardware-adaptive system optimizer. Auto-detects macOS / Linux / WSL / Windows (MINGW/Cygwin/MSYS2) and CPU/RAM/disk/GPU profile, then picks the right cleanup strategy. Scans reclaimable disk space, memory pressure, runaway processes, startup bloat, network issues. CleanMyMac built into Claude Code.Engineering★ 3.7K
- ESPHometonylofgren/aurora-smart-homeESPHome device configuration, firmware, and IoT product development. Covers ESP32, ESP32-S3, ESP32-C3, ESP32-C6, ESP32-H2, ESP32-P4, ESP8266, RP2040, RP2350, nRF52, LibreTiny, Shelly, Sonoff, Tuya, BLE proxy, Matter firmware, Thread, Zigbee, GPIO, sensor YAML, LVGL displays, LED strips, voice assistant hardware, device flashing, Arduino conversion, alarm_control_panel, lock, valve, media_player, microphone, speaker, audio DAC, event entities, datetime entities, Z-Wave proxy, MIPI DSI displays, and DLMS smart meters. Also covers designing new ESPHome-based products: hardware selection, component sourcing, PCB design (KiCad), enclosures, 3D printing, CE/FCC certification, BOM optimization, and manufacturing from prototype to production scale.Design★ 107
- feature-flag-onboardingharness/harness-skillsOrchestrate first-time Harness FME onboarding for one application. Confirm an already-enabled FME account/project, then pick one verified non-production environment; if none exists, hand off to an admin, not creating one. Detect the codebase's language and framework, then delegate code integration to instrument-feature-flag — never duplicating its wrapper design or creating the same flag twice. Verify two distinct named-treatment outcomes live through separately approved targeting changes when needed, not just default/fallback responses. Resumes from live state and a non-secret progress summary instead of a checkpoint file; never recreates a flag from uncertain absence or reuses a stale approval. Use when asked to onboard FME for an app, set up feature flags end-to-end, or prove a flag works live. Not for flag creation alone (create-feature-flag), code gating alone (instrument-feature-flag), targeting alone (update-flag-targeting), or metric/experiment setup.Design★ 125
Ratings & reviews
—
no reviews
Tried this skill? Rate it to help others. Sign in
Discussion
Join the discussion. Sign in