embedded-iot
From the author
Embedded systems firmware, microcontrollers (ESP32, STM32, Arduino, Raspberry Pi), RTOS (FreeRTOS, Zephyr), IoT protocols (MQTT, CoAP, BLE), bare-metal C/C++, and hardware peripheral interfaces (I2C, SPI, UART, GPIO). Use when developing firmware, working with microcontrollers, or building IoT devices.
Install
npx skills add travisjneuman/.claude --skill embedded-iot -a claude-code
Installs to .claude/skills/embedded-iot/ · Each command fetches the skill straight from GitHub with the open skills CLI.
Byte-identical to the scanned commit, with the repository’s licence and a SOURCE.txt.
Want your agent to suggest skills while you type? See how to use skills from your IDE.
Safety checks on SKILL.md
No warnings.
Why 83
aiqbench computes the trust score from public signals. It is not a security audit, so read a skill before you install it.
Similar skills
Closest to this one by what they do and when they are used.
- embedded-systemsJeffallan/claude-skillsUse when developing firmware for microcontrollers, implementing RTOS applications, or optimizing power consumption. Invoke for STM32, ESP32, FreeRTOS, bare-metal, power optimization, real-time systems, configure peripherals, write interrupt handlers, implement DMA transfers, debug timing issues.Writing★ 12K
- agent-embedded-developertravisjneuman/.claudeSpecialist subagent: Embedded systems, firmware, RTOS, microcontrollers (STM32, ESP32, Arduino), IoT, and bare-metal C/C++ specialist. Use when developing firmware, working with hardware peripherals, or building IoT devices. Trigger phrases: embedded, firmware, RTOS, microcontroller, Arduino, ESP32, STM32, IoT, bare-metal, I2C, SPI, UART, FreeRTOS, Zephyr.Planning★ 106
- esp32-developmentmagnus919/agent-skillsBuild, configure, flash, test, debug, and recover firmware for ESP32-family boards, including ESP-IDF C/C++, Arduino/PlatformIO, MicroPython, CircuitPython, ESPHome, Zephyr, Rust, and NuttX. Use when identifying an ESP32 board, choosing a framework, wiring GPIO or peripheral buses, integrating sensors or actuators, diagnosing serial/boot/power/network failures, planning OTA and production security, or automating hardware tests and fault injection. Do not use as a substitute for the exact board schematic, SoC datasheet, or attached component datasheet.Security★ 147
- offensive-iotSnailSploit/Claude-RedIoT and embedded device security testing methodology. Covers hardware reconnaissance (UART, JTAG, SWD, SPI flash, I2C EEPROM, eMMC chip-off), firmware acquisition (vendor portals, OTA capture, flash dump, binwalk extraction), firmware analysis (filesystem mounting, binary triage, hardcoded secrets, default credential discovery), bootloader attacks (U-Boot console, secure-boot bypass, fault injection), runtime attacks on embedded Linux/RTOS (busybox CVEs, MTD writes, /dev/mem), wireless protocol attacks (Zigbee, BLE, Z-Wave, LoRaWAN, Thread/Matter, sub-GHz), MQTT/CoAP/Modbus/BACnet/OPC-UA exploitation, mobile companion app analysis, cloud-IoT API abuse, and side-channel/glitching basics. Use for IoT pentest, smart-home assessment, ICS/OT testing, or embedded vulnerability research.Security★ 8.8K
- embedded-project-governancecrichars/embedded-project-governanceA lightweight, risk-scaled workflow for AI-assisted embedded firmware development. Use when onboarding an embedded project, investigating or implementing firmware changes, working around generated code, handling shared interfaces, protocols, Flash/NVM, boot, DMA, ISR/RTOS concurrency, hardware bring-up, recovery, or target verification. Supports minimal user input and structured Issue-style tasks.Finance★ 88
- volttonone-ai/tononeEmbedded and IoT engineer — firmware, microcontrollers, OTA updates, device protocols. Use when asked to "write firmware", "design OTA updates", "pick a microcontroller", or "implement a device protocol".Design★ 76
Ratings & reviews
—
no reviews
Tried this skill? Rate it to help others. Sign in
Discussion
Join the discussion. Sign in