gpio-baremetal
From the author
Use when configuring GPIO modes, alternate functions, pull resistors, or EXTI interrupts on STM32/nRF/ESP32-class MCUs. Not for register access rules: use mmio-and-bit-manipulation.
Install
npx skills add OutlineDriven/outline-driven-development --skill gpio-baremetal -a claude-code
Installs to .claude/skills/gpio-baremetal/ · Each command fetches the skill straight from GitHub with the open skills CLI.
Byte-identical to the scanned commit, with the repository’s licence and a SOURCE.txt.
Want your agent to suggest skills while you type? See how to use skills from your IDE.
Safety checks on SKILL.md
No warnings.
Why 82
aiqbench computes the trust score from public signals. It is not a security audit, so read a skill before you install it.
Similar skills
Closest to this one by what they do and when they are used.
- dma-baremetalOutlineDriven/outline-driven-developmentUse when configuring DMA channels, circular buffer mode, double buffering, memory-to-peripheral transfers, or DMA IRQ completion on bare-metal MCUs. Not for cache theory: use cpu-cache-opt.Productivity★ 54
- embedded-systemsJeffallan/claude-skillsUse when developing firmware for microcontrollers, implementing RTOS applications, or optimizing power consumption. Invoke for STM32, ESP32, FreeRTOS, bare-metal, power optimization, real-time systems, configure peripherals, write interrupt handlers, implement DMA transfers, debug timing issues.Writing★ 12.1K
- embedded-iottravisjneuman/.claudeEmbedded systems firmware, microcontrollers (ESP32, STM32, Arduino, Raspberry Pi), RTOS (FreeRTOS, Zephyr), IoT protocols (MQTT, CoAP, BLE), bare-metal C/C++, and hardware peripheral interfaces (I2C, SPI, UART, GPIO). Use when developing firmware, working with microcontrollers, or building IoT devices.Other★ 106
- esp32-developmentmagnus919/agent-skillsBuild, configure, flash, test, debug, and recover firmware for ESP32-family boards, including ESP-IDF C/C++, Arduino/PlatformIO, MicroPython, CircuitPython, ESPHome, Zephyr, Rust, and NuttX. Use when identifying an ESP32 board, choosing a framework, wiring GPIO or peripheral buses, integrating sensors or actuators, diagnosing serial/boot/power/network failures, planning OTA and production security, or automating hardware tests and fault injection. Do not use as a substitute for the exact board schematic, SoC datasheet, or attached component datasheet.Security★ 148
- qemu-kvmOutlineDriven/outline-driven-developmentUse when running qemu-system-x86_64 with KVM, wiring virtio devices, passing a PCI device through with VFIO, driving QMP, using virsh or virt-install, or booting a kernel with -kernel and -append.Other★ 54
- openocd-jtagOutlineDriven/outline-driven-developmentUse when configuring OpenOCD for a JTAG or SWD target, flashing through it, attaching GDB to a bare-metal MCU, or setting hardware breakpoints and watchpoints. Not for probe-rs: use embedded-rust.Other★ 54
Ratings & reviews
—
no reviews
Tried this skill? Rate it to help others. Sign in
Discussion
Join the discussion. Sign in