embedded-stm32
From the author
Best practices for embedded C/C++ development on STM32 microcontrollers using the HAL, covering peripherals, DMA, interrupts, memory constraints, and hardware-focused testing. Use when writing STM32 HAL code, configuring peripherals generated by STM32CubeMX, working with interrupts or DMA, debugging with SWD/JTAG, managing memory-constrained firmware, or writing hardware-in-the-loop or host-build tests for embedded C.
Install
npx skills add Mindrally/skills --skill embedded-stm32 -a claude-code
Installs to .claude/skills/embedded-stm32/ · Each command fetches the skill straight from GitHub with the open skills CLI.
Byte-identical to the scanned commit, with the repository’s licence and a SOURCE.txt.
Want your agent to suggest skills while you type? See how to use skills from your IDE.
Safety checks on SKILL.md
No warnings.
Why 85
aiqbench computes the trust score from public signals. It is not a security audit, so read a skill before you install it.
Similar skills
Closest to this one by what they do and when they are used.
- embedded-systemsJeffallan/claude-skillsUse when developing firmware for microcontrollers, implementing RTOS applications, or optimizing power consumption. Invoke for STM32, ESP32, FreeRTOS, bare-metal, power optimization, real-time systems, configure peripherals, write interrupt handlers, implement DMA transfers, debug timing issues.Writing★ 12.1K
- matlab-deploy-embedded-codematlab/matlab-agentic-toolkitDeploy MATLAB-generated code to embedded hardware using Embedded Coder. Use when configuring code generation for microcontrollers (STM32, Raspberry Pi, ARM Cortex), setting up PIL/SIL verification, disabling dynamic memory allocation, or configuring hardware-specific code generation settings. Covers ERT-based configurations, processor-in-the-loop testing, memory constraints, and the MEX→SIL→PIL verification progression.DevOps★ 1.2K
- embedded-iottravisjneuman/.claudeEmbedded systems firmware, microcontrollers (ESP32, STM32, Arduino, Raspberry Pi), RTOS (FreeRTOS, Zephyr), IoT protocols (MQTT, CoAP, BLE), bare-metal C/C++, and hardware peripheral interfaces (I2C, SPI, UART, GPIO). Use when developing firmware, working with microcontrollers, or building IoT devices.Other★ 106
- esp32-developmentmagnus919/agent-skillsBuild, configure, flash, test, debug, and recover firmware for ESP32-family boards, including ESP-IDF C/C++, Arduino/PlatformIO, MicroPython, CircuitPython, ESPHome, Zephyr, Rust, and NuttX. Use when identifying an ESP32 board, choosing a framework, wiring GPIO or peripheral buses, integrating sensors or actuators, diagnosing serial/boot/power/network failures, planning OTA and production security, or automating hardware tests and fault injection. Do not use as a substitute for the exact board schematic, SoC datasheet, or attached component datasheet.Security★ 148
- firmware-hardware-assessmentzero-lab-ai/skillsTracks embedded-device and firmware assessment coverage across exact units, acquisition methods, debug interfaces, stored secrets, update trust, radios, physical safety, and delegated external systems. Use when planning, conducting, reviewing, or handing over an authorized hardware or IoT penetration test.Testing★ 282
- agent-embedded-developertravisjneuman/.claudeSpecialist subagent: Embedded systems, firmware, RTOS, microcontrollers (STM32, ESP32, Arduino), IoT, and bare-metal C/C++ specialist. Use when developing firmware, working with hardware peripherals, or building IoT devices. Trigger phrases: embedded, firmware, RTOS, microcontroller, Arduino, ESP32, STM32, IoT, bare-metal, I2C, SPI, UART, FreeRTOS, Zephyr.Planning★ 106
Ratings & reviews
—
no reviews
Tried this skill? Rate it to help others. Sign in
Discussion
Join the discussion. Sign in