Skip to content
aiqbench takeQuantum Computing

aiqbench analysis

This research presents a scalable fabrication method for traveling-wave parametric amplifiers (TWPAs) by hybridizing deep-ultraviolet lithography with electron-beam patterning, addressing critical bottlenecks in cryogenic microwave component density. The resulting device achieves near-quantum-limited noise performance and broadband gain, offering a viable pathway toward mass-producing high-fidelity readout hardware for large-scale superconducting quantum processors.
Source coveringarXiv
What this isA model's reading of the article and related coverage, written for aiqbench. Not the publisher's words.

Quantum-limited traveling-wave parametric amplifier based on DUV-defined planar structures

arXiv3 min read

arXiv:2603.14455v2 Announce Type: replace Abstract: The relentless scaling of classical microelectronics has been enabled by the precision and reproducibility of deep-ultraviolet (DUV) optical lithography. Implementing large-scale superconducting quantum processors will require cryogenic microwave components that follow a similarly scalable fabrication path. This need is particularly acute for high circuit-density devices such as traveling-wave parametric amplifiers (TWPAs), where recent implementations have demonstrated high gain, broad bandwidth, high saturation power, and near-quantum-limited noise, but trade-offs between footprint, insertion loss, and scalable integration remain. Here, we demonstrate a four-wave-mixing TWPA fabricated via a hybrid scheme that combines DUV-defined planar circuit elements with electron-beam-patterned Josephson junctions, constituting a first step toward fully scalable manufacturing. The device combines a compact footprint of 6.6 mm $\times$ 6.6 mm with broadband gain over the measured 3-11 GHz span and an average 1 dB compression point of -102 dBm. By using planar capacitors to reduce loss, it operates near the quantum limit, with an average added noise of 0.4 photons above the standard quantum limit in the 4 to 8 GHz band. The phase-matching stopband remains narrow, with a bandwidth of 43 MHz, consistent with resonator-frequency variation below 1% and indicative of the circuit-parameter uniformity enabled by DUV lithography. These results show that DUV-defined planar elements can enable compact, low-loss, near-quantum-limited TWPAs and provide a promising route toward high-density cryogenic microwave hardware for large-scale quantum systems.

Abstract:The relentless scaling of classical microelectronics has been enabled by the precision and reproducibility of deep-ultraviolet (DUV) optical lithography. Implementing large-scale superconducting quantum processors will require cryogenic microwave components that follow a similarly scalable fabrication path. This need is particularly acute for high circuit-density devices such as traveling-wave parametric amplifiers (TWPAs), where recent implementations have demonstrated high gain, broad bandwidth, high saturation power, and near-quantum-limited noise, but trade-offs between footprint, insertion loss, and scalable integration remain. Here, we demonstrate a four-wave-mixing TWPA fabricated via a hybrid scheme that combines DUV-defined planar circuit elements with electron-beam-patterned Josephson junctions, constituting a first step toward fully scalable manufacturing. The device combines a compact footprint of 6.6 mm $\times$ 6.6 mm with broadband gain over the measured 3-11 GHz span and an average 1 dB compression point of -102 dBm. By using planar capacitors to reduce loss, it operates near the quantum limit, with an average added noise of 0.4 photons above the standard quantum limit in the 4 to 8 GHz band. The phase-matching stopband remains narrow, with a bandwidth of 43 MHz, consistent with resonator-frequency variation below 1% and indicative of the circuit-parameter uniformity enabled by DUV lithography. These results show that DUV-defined planar elements can enable compact, low-loss, near-quantum-limited TWPAs and provide a promising route toward high-density cryogenic microwave hardware for large-scale quantum systems.

arXiv:2603.14455 [quant-ph]

(or arXiv:2603.14455v2 [quant-ph] for this version)

https://doi.org/10.48550/arXiv.2603.14455 Focus to learn more arXiv-issued DOI via DataCite

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.

Full text under the publisher's open licence · 312 words

Related coverage