Skip to content
aiqbenchAI & Quantum Intelligence
NewsInsightsBenchmarksSkillsAsk AILearnAbout
...Loading your session
NewsInsightsBenchmarksSkillsAsk AILearnAbout
Back to list
aiqbench takeAI Products

aiqbench analysis

LuxTac introduces a novel optical tactile sensor array capable of resolving shear forces at the individual taxel level, addressing key limitations in current robot learning systems. By integrating these high-fidelity touch inputs with transformer-based policies, the system demonstrates measurable improvements in complex manipulation tasks like peg-in-hole insertion. This hardware advancement directly enables more robust and data-efficient reinforcement learning for robotic grippers.
1
Source coveringarXiv

LuxTac: A Flexible, Scalable, and Open-Source Optical Taxel Array with Distributed Three-Axis Force Sensing for Tactile Robot Learning

arXiv·November 19, 2026·3 min read

From arXiv

Full text

arXiv:2611.23575v1 Announce Type: new Abstract: Low-cost tactile arrays have made touch a practical input for robot learning, but piezoresistive designs sense only pressure, while camera-based sensors that also resolve shear are too bulky to tile over a gripper. To solve this problem, we present LuxTac, a flexible, scalable optical taxel array, about 3.5 mm thick and built from off-the-shelf parts. Each taxel is a digital RGBC light-to-digital converter under a translucent white silicone layer capped by an opaque black film, so the back-scattered LED light falls monotonically with local indentation depth.

The same board accepts two interchangeable gel cartridges: a plain one for normal sensing, and one with colored walls that encodes the local shear in the color of the returned light, with no camera, magnets, or bump overlay, making LuxTac, to our knowledge, the first optical taxel array to resolve shear at individual taxels. Characterized with an automated CNC indenter and a six-axis force/torque sensor, the normal cartridge responds linearly to force ($R^2$ = 0.999) from 104 mN to at least 5.8 N, with 2.0% repeatability, 5.9% hysteresis, and a taxel-to-taxel variation of 6-10% after normalization.

With the shear cartridge, per-taxel models estimate the three-axis force at every taxel; across three indenter shapes and nine held-out sessions, the summed estimates reach $R^2$ = 0.96/0.96/0.92 in x/y/z, each taxel's estimate 0.92/0.93/0.94, and the median shear-direction error is 4.8 degrees. Adding LuxTac pressure readings to an Action Chunking Transformer policy substantially improves peg-in-hole success over a vision-only baseline. Design files, code, and videos are available at https://luxtac.github.io.

Abstract:Low-cost tactile arrays have made touch a practical input for robot learning, but piezoresistive designs sense only pressure, while camera-based sensors that also resolve shear are too bulky to tile over a gripper. To solve this problem, we present LuxTac, a flexible, scalable optical taxel array, about 3.5 mm thick and built from off-the-shelf parts. Each taxel is a digital RGBC light-to-digital converter under a translucent white silicone layer capped by an opaque black film, so the back-scattered LED light falls monotonically with local indentation depth.

The same board accepts two interchangeable gel cartridges: a plain one for normal sensing, and one with colored walls that encodes the local shear in the color of the returned light, with no camera, magnets, or bump overlay, making LuxTac, to our knowledge, the first optical taxel array to resolve shear at individual taxels. Characterized with an automated CNC indenter and a six-axis force/torque sensor, the normal cartridge responds linearly to force ($R^2$ = 0.999) from 104 mN to at least 5.8 N, with 2.0% repeatability, 5.9% hysteresis, and a taxel-to-taxel variation of 6-10% after normalization.

With the shear cartridge, per-taxel models estimate the three-axis force at every taxel; across three indenter shapes and nine held-out sessions, the summed estimates reach $R^2$ = 0.96/0.96/0.92 in x/y/z, each taxel's estimate 0.92/0.93/0.94, and the median shear-direction error is 4.8 degrees. Adding LuxTac pressure readings to an Action Chunking Transformer policy substantially improves peg-in-hole success over a vision-only baseline. Design files, code, and videos are available at this https URL.

11 pages, 9 figures, 5 tables. Project page: this https URL

Robotics (cs.RO)

arXiv:2611.23575 [cs.RO]

(or arXiv:2611.23575v1 [cs.RO] for this version)

https://doi.org/10.48550/arXiv.2611.23575 Focus to learn more arXiv-issued DOI via DataCite (pending registration)

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.

Full text under the publisher's open licence · 357 words

Read at arXiv ↗Ask about this article

Related coverage

AI Research

BLInD: Learning Driver Intent as a Distribution over Future Ego Trajectories

arXiv · Sep 15, 2026

Quantum Comms

Multidimensional Reconciliation in Continuous-Variable QKD: Review, Coding Schemes, and Open Source Simulation

arXiv · Jun 3, 2026

AI Safety

Auditor-in-a-Box: Tools for Third-Party Auditing

LessWrong · Jul 28, 2026

Quantum Comms

The 2026 Quantum Open Source Software Survey Results

Unitary Foundation · Nov 16, 2026

Article info

Source

arXiv

Published

November 19, 2026

Read time

3 min

Category

AI Products
aiqbench
AI & Quantum Intelligence© aiqbench. All rights reserved.

Feeds:RSS·JSON Feed

LanguageEnglish·Românăbeta
NewsAI & TechQuantumInsights
ExploreBenchmarksLearn
CompanyAboutTrustLegal noticeTerms of ServicePrivacy PolicyCopyright noticesData erasureReport content

The aiqbench take, the insights, the daily digest and Ask answers are written by AI models from the sources shown, without editorial review before publication. They may contain errors — check the source. How the model is used →

  • News
  • Insights
  • Ask AI
  • Benchmarks
  • Account