Skip to content
aiqbench takeAI Research

aiqbench analysis

This research introduces FE-MAD, an end-to-end differentiable framework that leverages automatic differentiation within a JAX-FEM solver to calibrate constitutive neural networks directly from heterogeneous full-field deformation data. By eliminating the need for analytic adjoints or offline surrogate models, the approach addresses key trade-offs between computational efficiency, robustness to noise, and model expressiveness in hyperelasticity. The method demonstrates viability across diverse scenarios, ranging from full digital image correlation datasets to reduced-data regimes and complex matrix-inclusion systems.
Source coveringarXiv
What this isA model's reading of the article and related coverage, written for aiqbench. Not the publisher's words.

Finite Element-Based Material Learning via Automatic Differentiation: Learning constitutive neural network models from full-field deformation data

arXiv3 min read

arXiv:2606.05199v1 Announce Type: cross Abstract: The identification of constitutive neural network models from heterogeneous full-field deformation data provides a robust alternative to traditional calibration methods based on homogeneous stress-strain experiments, particularly given the high dimensionality of trainable parameters. Existing approaches must balance generality, robustness, and computational efficiency: Conventional finite element model updating is broadly applicable but computationally demanding; weak-form methods offer efficiency but are sensitive to noise and data scarcity; neural operator models are highly expressive but require extensive training datasets. This work presents FE-MAD (Finite Element-Based Material learning via Automatic Differentiation), an end-to-end differentiable framework that integrates a constitutive neural network model within a JAX-FEM nonlinear solver and identifies its parameters through gradient-based minimization of a measurement-mismatch loss. Newton tangent stiffness and loss gradients are computed automatically using forward- and reverse-mode automatic differentiation throughout the entire pipeline, thereby removing the need for analytic adjoints or offline surrogate models. FE-MAD is demonstrated for two architectures: a grey-box Constitutive Artificial Neural Network (CANN), a polyconvex, fully connected model with high flexibility, and a white-box CANN, an expert-system network with phenomenologically interpretable strain-energy terms. Focusing on incompressible isotropic hyperelasticity, FE-MAD is evaluated on three open experimental datasets: (1) full digital image correlation (DIC) of a perforated tensile specimen, (2) a reduced-data scenario with a one-dimensional stretch profile and global force-displacement curve, and (3) a heterogeneous matrix-inclusion system in which both phases constitutive laws are identified and generalized to twenty-two previously unseen samples.

Abstract:The identification of constitutive neural network models from heterogeneous full-field deformation data provides a robust alternative to traditional calibration methods based on homogeneous stress-strain experiments, particularly given the high dimensionality of trainable parameters. Existing approaches must balance generality, robustness, and computational efficiency: Conventional finite element model updating is broadly applicable but computationally demanding; weak-form methods offer efficiency but are sensitive to noise and data scarcity; neural operator models are highly expressive but require extensive training datasets. This work presents FE-MAD (Finite Element-Based Material learning via Automatic Differentiation), an end-to-end differentiable framework that integrates a constitutive neural network model within a JAX-FEM nonlinear solver and identifies its parameters through gradient-based minimization of a measurement-mismatch loss. Newton tangent stiffness and loss gradients are computed automatically using forward- and reverse-mode automatic differentiation throughout the entire pipeline, thereby removing the need for analytic adjoints or offline surrogate models. FE-MAD is demonstrated for two architectures: a grey-box Constitutive Artificial Neural Network (CANN), a polyconvex, fully connected model with high flexibility, and a white-box CANN, an expert-system network with phenomenologically interpretable strain-energy terms. Focusing on incompressible isotropic hyperelasticity, FE-MAD is evaluated on three open experimental datasets: (1) full digital image correlation (DIC) of a perforated tensile specimen, (2) a reduced-data scenario with a one-dimensional stretch profile and global force-displacement curve, and (3) a heterogeneous matrix-inclusion system in which both phases constitutive laws are identified and generalized to twenty-two previously unseen samples.

Computational Physics (physics.comp-ph); Artificial Intelligence (cs.AI)

arXiv:2606.05199 [physics.comp-ph]

(or arXiv:2606.05199v1 [physics.comp-ph] for this version)

https://doi.org/10.48550/arXiv.2606.05199 Focus to learn more arXiv-issued DOI via DataCite

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.

Full text under the publisher's open licence · 330 words

Related coverage