Skip to content
aiqbench takeAI Products

aiqbench analysis

This paper addresses a critical bottleneck in robotics by introducing a differentiable finite element method framework specifically for pneumatic soft robots. By enabling gradient-based calibration and trajectory optimization, the approach significantly improves modeling accuracy and efficiency for complex, non-linear systems. This advancement directly supports the development of more capable robotic agents that can perform precise manipulation tasks.
Source coveringarXiv
What this isA model's reading of the article and related coverage, written for aiqbench. Not the publisher's words.

An End-to-End Framework for Modelling Pneumatic Soft Robots Based on Differentiable Finite Element Methods

arXiv3 min read

arXiv:2610.04612v1 Announce Type: new Abstract: Soft robots present significant modelling challenges due to their non-linearity, complex dynamics and potentially intricate geometries. These difficulties in accurate system identification and dynamics modelling limit their applications in precise robotics tasks. Prior modelling approaches typically suffer from trade-offs in accuracy, computational efficiency, or speed. The differentiable finite element method (FEM) offers a promising balance between these desiderata for soft robot modelling, and enables the use of gradients for efficient calibration and trajectory optimisation. In this paper, we propose an end-to-end differentiable FEM-based framework designed to streamline modelling and system identification for pneumatic soft robots, enabling the generation of reliable models for downstream tasks. The framework automates the conversion of computer-aided designs into voxelised tetrahedral viscoelastic FEM meshes that accurately represent the robot's geometry and actuation mechanism. By integrating easily acquired point cloud data with differentiable FEM, the framework achieves precise identification of material and dynamic actuation parameters using a minimal experimental setup. Additionally, the differentiable nature of the model facilitates trajectory optimisation by leveraging gradients from robot dynamics and contact interactions. We validate the framework by modelling a complex bellow-shaped pneumatic soft robot and demonstrate its efficacy in real-world motion planning tasks. Experimental results indicate high modelling accuracy, with a maximum positional error of less than 3 mm, and successful application in tasks such as path following and grasping.

Abstract:Soft robots present significant modelling challenges due to their non-linearity, complex dynamics and potentially intricate geometries. These difficulties in accurate system identification and dynamics modelling limit their applications in precise robotics tasks. Prior modelling approaches typically suffer from trade-offs in accuracy, computational efficiency, or speed. The differentiable finite element method (FEM) offers a promising balance between these desiderata for soft robot modelling, and enables the use of gradients for efficient calibration and trajectory optimisation. In this paper, we propose an end-to-end differentiable FEM-based framework designed to streamline modelling and system identification for pneumatic soft robots, enabling the generation of reliable models for downstream tasks. The framework automates the conversion of computer-aided designs into voxelised tetrahedral viscoelastic FEM meshes that accurately represent the robot's geometry and actuation mechanism. By integrating easily acquired point cloud data with differentiable FEM, the framework achieves precise identification of material and dynamic actuation parameters using a minimal experimental setup. Additionally, the differentiable nature of the model facilitates trajectory optimisation by leveraging gradients from robot dynamics and contact interactions. We validate the framework by modelling a complex bellow-shaped pneumatic soft robot and demonstrate its efficacy in real-world motion planning tasks. Experimental results indicate high modelling accuracy, with a maximum positional error of less than 3 mm, and successful application in tasks such as path following and grasping.

Robotics (cs.RO); Systems and Control (eess.SY)

arXiv:2610.04612 [cs.RO]

(or arXiv:2610.04612v1 [cs.RO] for this version)

https://doi.org/10.48550/arXiv.2610.04612 Focus to learn more arXiv-issued DOI via DataCite (pending registration)

IEEE Robotics and Automation Letters, vol. 10, no. 12, pp. 13003-13010, 2025

https://doi.org/10.1109/LRA.2025.3625507 Focus to learn more DOI(s) linking to related resources

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.

Full text under the publisher's open licence · 339 words

Related coverage