matlab-transmit-capture-usrp
From the author
Transmit and capture RF waveforms using Wireless Testbench with NI USRP radios (X410, X310, N310, N320, N321, N300, X300, E320). Use when generating test signals, transmitting over the air, capturing IQ data, performing loopback tests, configuring multi-antenna setups, or troubleshooting dropped samples and gain settings. Covers basebandTransceiver, basebandTransmitter, basebandReceiver, continuous and once transmit modes, foreground and background capture, and UseRadioBuffer options. Also use when the user mentions transmit waveform, capture signal, IQ data, loopback, RF gain, sample rate, or antenna configuration.
Install
npx skills add matlab/matlab-agentic-toolkit --skill matlab-transmit-capture-usrp -a claude-code
Installs to .claude/skills/matlab-transmit-capture-usrp/ · Each command fetches the skill straight from GitHub with the open skills CLI.
No download: this skill’s licence (Custom or unclear) does not let us redistribute its files. The install commands fetch them from GitHub instead.
Want your agent to suggest skills while you type? See how to use skills from your IDE.
Safety checks on SKILL.md
No warnings.
Why 82
aiqbench computes the trust score from public signals. It is not a security audit, so read a skill before you install it.
Similar skills
Closest to this one by what they do and when they are used.
- matlab-set-up-usrp-radiomatlab/matlab-agentic-toolkitSet up and verify a connection to an NI USRP radio (USRP E320, N300, N310, N320, N321, X300, X310, or X410) using Wireless Testbench. Use when connecting a USRP for the first time, configuring radio hardware, troubleshooting connection failures, or verifying a radio setup. Covers host inspection (OS, NIC type/speed/MTU), device discovery (findsdru, probesdru), UHD version checking, programmatic radio configuration, and basebandTransceiver verification. Also use when the user mentions USRP setup, radio not found, connection errors, dropped samples, or network configuration for SDR hardware.Other★ 1.2K
- matlab-detect-capture-usrpmatlab/matlab-agentic-toolkitSmart triggered RF capture on NI USRP radios with Wireless Testbench — record only when a signal of interest appears, not continuously (triggered spectrum sensing). Use energy detection to capture when signal power rises above the noise floor, or preamble detection to cross-correlate against a known sequence (WLAN L-LTF, 5G NR PSS/SSS, LTE PSS, Zadoff-Chu, custom protocols) and capture only when that protocol's preamble is detected. Use when implementing triggered (wake-on-signal) capture or spectrum sensing, capturing protocol-based signals via cross-correlation, calibrating detection thresholds (plotDetectionSignals / plotThreshold), scanning frequency bands for activity, or building transmit-then-detect workflows.Planning★ 1.2K
- matlab-generate-wlan-waveformmatlab/matlab-agentic-toolkitGenerate standard-compliant IEEE 802.11 waveforms using MATLAB WLAN Toolbox. Use when creating WLAN waveforms, PPDU packets, or the transmit side of a link-level simulation. Covers all formats: Non-HT (802.11a/g), HT (802.11n), VHT (802.11ac), HE-SU/HE-MU/HE-TB (802.11ax), EHT-MU/EHT-TB (802.11be), UHR-MU/UHR-TB/UHR-ELR (802.11bn). Handles single-user, MU-MIMO, OFDMA, trigger-based uplink, extended range, preamble puncturing, UEQM, and DRU. Use when asked to generate test waveforms, create packets with MAC frames, configure OFDMA resource units, build trigger-based uplink transmissions, target a specific transmit duration, or build multi-packet waveforms.Testing★ 1.2K
- matlab-generate-5g-waveformmatlab/matlab-agentic-toolkitGenerate 3GPP-compliant 5G NR downlink and uplink baseband waveforms. Use to create NR signals, test model (TM) waveforms, fixed reference channels (FRC), test and measurement (T&M) signals, or test vectors for conformance testing. Covers configuring data, control, and broadcast channels and signals: PDSCH, PUSCH, PDCCH, PUCCH, SRS, SSBurst, CSI-RS, DM-RS, PT-RS, CORESET, and BWP parameters including bandwidth, subcarrier spacing (SCS), modulation (QPSK, QAM), numerology, FR1, FR2, TDD, FDD, and multi-bandwidth-part setups. Use for signal generation, RF instrument playback, or IQ baseband synthesis. Requires 5G Toolbox.Testing★ 1.2K
- matlab-integrate-antennamatlab/matlab-agentic-toolkitIntegrate antennas into RF systems using MATLAB Antenna Toolbox and RF Toolbox. Covers impedance matching network design (L/Pi/Tee topologies, evaluation parameters, Richards transformation), measured antenna creation (E-field, directivity-only, EmbeddedE, ffsReader import), RF propagation and site planning (txsite/rxsite, coverage, SINR, ray tracing, link budget), and SAR estimation (birdcage+Phantom, conformalArray+Custom3D, direct EHfields). Use when the user wants to match an antenna, create a measuredAntenna, compute coverage or signal strength, perform ray tracing, or estimate SAR.Design★ 1.2K
- matlab-design-radar-waveformmatlab/matlab-agentic-toolkitDesign, select, and analyze waveforms for radar, sonar, and active sensing using the Phased Array System Toolbox. Covers LFM, NLFM, FMCW, phase-coded, CW, stepped FM, custom IQ, ambiguity functions, sidelobe reduction, and Doppler tolerance. Key objects: phased.LinearFMWaveform, phased.NonlinearFMWaveform, phased.CustomFMWaveform, phased.PhaseCodedWaveform, phased.FMCWWaveform, phased.SteppedFMWaveform, phased.MFSKWaveform, phased.RectangularWaveform, nlfmspec2freq, shapespectrum, ambgfun, pambgfun, sidelobelevel, legendreseq, mlseq, radarWaveformGenerator.Design★ 1.2K
Ratings & reviews
—
no reviews
Tried this skill? Rate it to help others. Sign in
Discussion
Join the discussion. Sign in