computing-feature-mating-poses
De la autor
Computes approach, engaged, and mate TCP poses from a held feature in the hand and a fixture feature, resolving free mate symmetries from the current robot pose without executing motion. Use when a held loop must go over a shaft or hook, or a held shaft or tip must enter an aperture, and explicit approach, engaged, and mate poses are needed for planning.
Instalare
npx skills add graph-robots/open-robot-skills --skill computing-feature-mating-poses -a claude-code
Se instalează în .claude/skills/computing-feature-mating-poses/ · Fiecare comandă descarcă skill-ul direct de pe GitHub cu utilitarul open source skills.
Identic octet cu octet cu commit-ul scanat, cu licența depozitului și un fișier SOURCE.txt.
Vrei ca agentul să-ți propună skill-uri în timp ce scrii? Vezi cum folosești skill-urile din IDE.
Verificări de siguranță pe SKILL.md
- Include scripturi pe care nu le-am verificatScăzut
De ce 76
aiqbench calculează scorul de încredere din semnale publice. Nu este un audit de securitate, așa că citește un skill înainte să-l instalezi.
Skill-uri similare
Cele mai apropiate de acesta prin ce fac și când sunt folosite.
- executing-held-object-motiongraph-robots/open-robot-skillsExecutes an ordered, collision-aware pose sequence for an already-grasped rigid object without releasing it - the escape from support, clear-space rotation, fixture transit and orientation-locked local legs of a carry plan, or only the free-space approach waypoint of a placement plan. Use when a held object must be carried or reoriented before insertion, mating, packing, or sorting, and use executing-feature-mating afterwards for the engagement and release.Planificare★ 58
- executing-feature-matinggraph-robots/open-robot-skillsExecutes a supplied feature-mating plan for an already-held rigid object - collision-aware planner legs tracked to millimetre precision, Cartesian servo for short corrections and fixture crossings, contact-controlled seating - then releases and retreats along the fixture axis or straight up. Use when the goal is a constrained mate such as a loop over a shaft, a shaft into an aperture, or a handle seated on a support; use transporting-objects for ordinary container drops.Planificare★ 58
- placing-held-featuregraph-robots/open-robot-skillsMove a held object so one of its declared features lands on a target point — a ring onto a hook, a tip into a hole, a plug at a bore. Composes the hand pose from the live object pose and the feature's centre in the object's own frame, recomputed each round so in-jaw slip cannot compound. Use for any goal written as "this object's feature at that place"; do NOT drive the hand to the target directly, which is wrong by the length of the held object.Redactare★ 58
- planning-held-object-motiongraph-robots/open-robot-skillsPlans the carry and engagement phases for an already-held rigid object: a clearance-first lift, the smallest feasible symmetry-equivalent reorientation, an orientation-locked transit above the fixture, or a direct plan to the approach pose; then a typed engagement or a straight linear insertion, optionally re-observing the held tip from the wrist first. Use when a held object must be brought to a fixture for insertion, hanging, packing, racking, or constrained sorting and an execution skill will run the resulting plans.Planificare★ 58
- registering-held-objectsgraph-robots/open-robot-skillsReobserves a grasped rigid object from the wrist cameras, estimates its functional feature in the TCP frame, and fits attached collision spheres, retaining the grasp-time transform at low confidence when the object is not seen. Use when a held object must be localized in the hand right after grasping or re-checked at a pre-contact pose before a fixture engagement.Altele★ 58
- matlab-plan-robot-motionmatlab/matlab-agentic-toolkitPlan manipulator motion and generate trajectories in MATLAB. Use when the task involves moving a robot arm between configurations or poses — whether the user says "trajectory," "motion," "path," "move from A to B," or "plan." This skill applies regardless of whether the user explicitly mentions collisions or obstacles; if geometry exists in the workspace, collision safety is implicit. Triggers on: manipulatorRRT, manipulatorCHOMP, dlCHOMP, contopptraj, trapveltraj, collision-free path, motion planner, RRT, CHOMP, TOPPRA, path shortening, obstacle avoidance for manipulators, time-optimal trajectory, velocity limits, acceleration limits, occupancyMap3D, meshtsdf, collision objects as environment, trajectory between waypoints, joint interpolation, move between poses, constant velocity, trapezoidal profile, feed rate. Also triggers when a user has IK solutions or waypoints and needs to connect them — whether for time-optimal motion, constant-speed welding/cutting, or any other trajectory parameterization.Planificare★ 1.2K
Note și recenzii
—
nicio recenzie
Ai încercat acest skill? Notează-l ca să-i ajuți pe alții. Autentifică-te
Discuție
Intră în discuție. Autentifică-te