faa-8110-49
From the author
Reconstructed reference notes on US FAA approval guidance for airborne software and airborne electronic hardware, built from four public-domain sources (FAA Order 8110.49A, AC 20-115D, AC 20-152A, AC 00-69; documents dated 2017-07-21 to 2022-10-07, pinned 2026-10-12). Use for how FAA certification staff plan and conduct software reviews (certification liaison, desk versus on-site review, review planning agreements), how the level of FAA involvement (LOI) is picked and scored with the Appendix A worksheets, how software conformity inspection works (software part and installation conformity, ASE and ASI tasks, Form 8120-10), what AC 20-115D recognizes and how DO-178B processes and tool qualification transition to DO-178C/DO-330 (supplements, FLS, UMS, legacy software changes), and what AC 20-152A adds for airborne electronic hardware (simple versus complex custom devices, robustness and HDL code coverage, tool assessment, previously developed hardware, COTS IP, COTS devices, circuit board assemblies), and what
Install
npx skills add jgsystemsconsulting/jgs-se-knowledge-packs --skill faa-8110-49 -a claude-code
Installs to .claude/skills/faa-8110-49/ · Each command fetches the skill straight from GitHub with the open skills CLI.
No download: this skill’s licence (Custom or unclear) does not let us redistribute its files. The install commands fetch them from GitHub instead.
Want your agent to suggest skills while you type? See how to use skills from your IDE.
Safety checks on SKILL.md
- Contains hidden text (invisible characters, long comments or encoded blobs)Medium
Why 70
aiqbench computes the trust score from public signals. It is not a security audit, so read a skill before you install it.
Similar skills
Closest to this one by what they do and when they are used.
- easa-rulesjgsystemsconsulting/jgs-se-knowledge-packsReconstructed reference notes on EASA acceptable means of compliance for airborne software and airborne electronic hardware, built from AMC 20-115D (ED Decision 2017/020/R, AMC-20 Amendment 14, consolidated in Amendment 23) and AMC 20-152A (ED Decision 2020/010/R, AMC-20 Amendment 19, consolidated in Amendment 23), read from the Easy Access Rules AMC-20 compilation (Amendment 23, June 2023) and pinned 2026-09-26. Use for EASA software means of compliance, EASA AEH means of compliance, AltMoC, ETSO software, and the joint software and hardware certification workflow. SCOPE LIMITS: the two AMC sections only; no FAA content (use faa-8110-49); no RTCA DO-178C or DO-254, EUROCAE ED-12C or ED-80, or supplement clause text (use avionics-signpost to name them); no Part-21 body; no bulk AMC-20; AMC 20-193 and AMC 20-189 are name-only; reflects Amendment 23 as consolidated in the June 2023 EAR, not a later AMC-20 amendment; synthesized reference notes, not legal advice and not the official AMC. LICENCE: per-document (ELegal★ 98
- avionics-signpostjgsystemsconsulting/jgs-se-knowledge-packsSignpost (not a knowledge pack) for the avionics development assurance standards landscape: RTCA DO-178C / EUROCAE ED-12C and its supplements (DO-330/ED-215, DO-331/ED-218, DO-332/ED-217, DO-333/ED-216); RTCA DO-254 / EUROCAE ED-80; SAE ARP4754B and ARP4761A; and the free regulator documents that recognise them (FAA AC 20-115D, AC 20-152A, Order 8110.49A; EASA AMC 20-115D and AMC 20-152A). Contains no source content: each row carries only the designation, title, edition, owner, redistributability status, and the owner's URL. Use when you need to identify, cite, or locate an avionics standard; paywalled rows point to the owner, free rows point to the regulator text, and the FAA rows also name the in-repo faa-8110-49 pack.Legal★ 98
- faa-req-handbookjgsystemsconsulting/jgs-se-knowledge-packsKnowledge base from the FAA Requirements Engineering Management Handbook (DOT/FAA/AR-08/32). Use for writing requirements for real-time, embedded control systems — the avionics/medical slant — via the Handbook's eleven recommended practices: system overview and boundary (monitored/controlled variables), operational concepts (use cases), environmental assumptions, change-tolerant functional architecture (dependency diagrams), safety-driven architecture revision (FHA/PSSA/fault tree), system modes, detailed behavior and performance requirements (ideal value + tolerance + latency), the four-variable model bridge to software requirements (MON/CON/NAT/REQ, IN'/REQ'/OUT', DO-178B mapping), subsystem allocation, and rationale. Carries the Isolette Thermostat and Flight Control System worked examples. Slanted toward control systems with sensors and actuators; thin on information-system / enterprise / agile requirements, on requirements-management tooling, and on the formal-methods internals of SCR/RSML/SpecTRM (it naScience★ 98
- nasa-npr-7150jgsystemsconsulting/jgs-se-knowledge-packsKnowledge base from NASA NPR 7150.2D — NASA Software Engineering Requirements. Use for NASA's Agency-wide software-engineering requirements: the software classification scheme (Classes A–F), the Requirements Mapping Matrix and class-driven applicability, tailoring and Technical Authority governance, the SWE-### 'shall' requirements across software management (Ch 3) and the engineering life cycle (Ch 4), the supporting disciplines (configuration management, risk, peer reviews/inspections, measurement, non-conformance — Ch 5), safety-critical and cybersecurity requirements, IV&V applicability, traceability, and the Appendix A definitions. Does not cover detailed software-assurance/safety procedures (see NASA-STD-8739.8), implementation how-to and document content (see NASA-HDBK-2203), the systems-engineering process framework (see NPR 7123.1), or program/project management (see NPR 7120.5).Planning★ 98
- faa-rmajgsystemsconsulting/jgs-se-knowledge-packsKnowledge base from FAA-HDBK-006D (2020), the FAA's System Reliability, Maintainability, and Availability (RMA) Handbook for National Airspace System (NAS) hardware and software. Use for RMA figures of merit (MTBF, MTBO, MTTR, the availability variants), the bathtub curve and probability distributions, the four-stage RMA lifecycle mapped to the FAA Acquisition Management System (AMS), the six-task RMA technical-management/acquisition process, service-thread criticality and the NAS-RD severity-to-target table, the RMA analysis toolbox (RBD, FMEA/FMECA, FTA, Ishikawa, Monte Carlo, Bayesian, FRACAS, ALT, reliability-growth/recovery tests), software reliability (early prediction + reliability growth), and tailorable example RMA requirements for a Program Requirements Document. Scope limits: it is FAA/NAS-specific guidance (not a requirement, by its own statement), centred on hardware-plus-software availability — it brackets out human/service/facility/communications availability, names but does not reproduce the mTesting★ 98
- faa-hf-stdjgsystemsconsulting/jgs-se-knowledge-packsKnowledge base from the FAA Human Factors Design Standard (HF-STD-001B, 2016) — the FAA's consolidated human-factors / human-systems-integration design criteria for systems it manages, operates, or maintains. Use for requirement-level design rules on: general human-factors design principles; automation and function allocation; designing equipment for maintenance; displays, controls, and visual indicators; alarms, audio, and voice communications; the computer-human interface (information presentation, coding, interaction styles, windows, dialogue); keyboards, input devices, and workstation/workplace ergonomics; system security, personnel safety, environment, anthropometry, and user documentation; plus intended-use and tailoring guidance. It is a quantified, source-attributed synthesis (heavily citing MIL-STD-1472G, MIL-HDBK-759C, DOD-HFDG-ATCCS, NUREG-0700, NASA-STD-3000, ANSI, OSHA, ISO 9241). Complements nasa-hsi as a parallel HSI tradition from the civil-aviation domain. Scope limits: it is design criteria,Security★ 98
Ratings & reviews
—
no reviews
Tried this skill? Rate it to help others. Sign in
Discussion
Join the discussion. Sign in