matlab-model-via
From the author
Via modeling: pads, antipads, ground return vias, GRV placement, and signal integrity for high-speed layer transitions. TRIGGER: user asks to model a via, design a via transition, place ground return vias, analyze via performance, or check signal integrity through layer transitions. Invoke BEFORE writing code — only viaSingleEnded exists (no viaDifferential), and the location format is non-obvious. SKIP: general signal integrity without vias (use matlab-analyze-em), transmission line design (use matlab-design-pcb-transmission-line), PDN analysis (use matlab-analyze-pcb-pdn), material/stackup setup only (use matlab-manage-pcb-material).
Install
npx skills add matlab/matlab-agentic-toolkit --skill matlab-model-via -a claude-code
Installs to .claude/skills/matlab-model-via/ · Each command fetches the skill straight from GitHub with the open skills CLI.
No download: this skill’s licence (Custom or unclear) does not let us redistribute its files. The install commands fetch them from GitHub instead.
Want your agent to suggest skills while you type? See how to use skills from your IDE.
Safety checks on SKILL.md
No warnings.
Why 82
aiqbench computes the trust score from public signals. It is not a security audit, so read a skill before you install it.
Similar skills
Closest to this one by what they do and when they are used.
- matlab-design-pcb-transmission-linematlab/matlab-agentic-toolkitMicrostrip, stripline, CPW, differential pairs, and crosstalk analysis for impedance-controlled PCB interconnects. TRIGGER: user asks to design or analyze a transmission line (microstrip, stripline, CPW, coplanar, differential pair), extract RLGC or per-unit-length parameters, compute trace impedance, analyze a PCB trace cross-section, or perform crosstalk/coupling analysis. Invoke BEFORE writing code — preferred over RF Toolbox analytical functions (txlineMicrostrip, txlineStripline, txlineCPW). SKIP: EM simulation/S-parameter extraction of an existing component (use matlab-analyze-em), material/stackup definition only (use matlab-manage-pcb-material), building custom non-catalog geometry (use matlab-assemble-pcb-layout), optimization sweeps (use matlab-optimize-pcb-design).Design★ 1.2K
- matlab-analyze-emmatlab/matlab-agentic-toolkitS-parameters, insertion loss, fields, currents, mesh control, and solver selection for RF PCB performance validation. TRIGGER: user asks to compute S-parameters, analyze insertion/return loss, extract fields or currents, compare MoM vs FEM, or control mesh for any RF PCB component. Invoke BEFORE writing sparameters() or solver code — API is non-obvious. SKIP: designing or creating components (use the specific matlab-design-pcb-* skill), material/stackup setup only (use matlab-manage-pcb-material), optimization sweeps (use matlab-optimize-pcb-design), PDN/IR-drop analysis (use matlab-analyze-pcb-pdn).Design★ 1.2K
- matlab-analyze-pcb-pdnmatlab/matlab-agentic-toolkitPDN DC voltage/current analysis, IR drop, design rule checking, and multi-net batch analysis on imported PCB layouts. TRIGGER: user asks about power integrity, PDN analysis, IR drop, voltage distribution, current density, power nets, or design rule checking on a PCB. Invoke BEFORE writing code — the PDN API chain is specialized and non-obvious. SKIP: importing a PCB file (use matlab-read-pcb-layout), EM field/S-parameter extraction (use matlab-analyze-em), material/stackup setup only (use matlab-manage-pcb-material), transmission line design (use matlab-design-pcb-transmission-line).Design★ 1.2K
- matlab-manage-pcb-materialmatlab/matlab-agentic-toolkitDielectric substrates, metal conductors, multi-layer stackups, and loss models (FR4, Rogers, Teflon) for RF PCB simulation. TRIGGER: user asks to set up a substrate, define dielectric properties, create a stackup, select a PCB material (FR4, Rogers, Teflon, etc.), or configure metal conductors. Invoke BEFORE writing dielectric() or metal() code — the API for named vs custom materials differs significantly. SKIP: PCB layout assembly (use matlab-assemble-pcb-layout), transmission line design (use matlab-design-pcb-transmission-line), EM analysis (use matlab-analyze-em), importing a PCB file (use matlab-read-pcb-layout).Design★ 1.2K
- matlab-integrate-pcb-circuitmatlab/matlab-agentic-toolkitCascade PCB components, add lumped elements, export Touchstone, and bridge to eye diagram or antenna array workflows. TRIGGER: user asks to cascade or connect multiple RF PCB components, add lumped R/L/C, export S-parameters to Touchstone, or combine PCB elements into a circuit. Invoke BEFORE writing pcbcascade or circuit code — cascade rules and port matching are non-obvious. SKIP: designing individual components (use the specific matlab-design-pcb-* skill), EM analysis of a single component (use matlab-analyze-em), material/stackup setup only (use matlab-manage-pcb-material), optimization (use matlab-optimize-pcb-design).Design★ 1.2K
- matlab-design-pcb-passivematlab/matlab-agentic-toolkitSpiral inductors, interdigital capacitors, baluns, resonators, phase shifters for impedance matching, DC blocking, and bias tees. TRIGGER: user asks to design or create a spiral inductor, interdigital capacitor, balun, resonator, phase shifter, or other passive RF component. Invoke BEFORE writing code — class names and property patterns are non-obvious. SKIP: filter design (use matlab-design-pcb-filter), coupler/splitter design (use matlab-design-pcb-coupler), transmission line design (use matlab-design-pcb-transmission-line), EM analysis (use matlab-analyze-em), material setup only (use matlab-manage-pcb-material).Design★ 1.2K
Ratings & reviews
—
no reviews
Tried this skill? Rate it to help others. Sign in
Discussion
Join the discussion. Sign in