offensive-z-wave
From the author
Z-Wave attack methodology — sniffing with Z-Force / EZ-Wave / RTL-SDR + ZniffMobile, S0 (legacy) network-key derivation flaw and key reuse, S2 (modern) ECDH commissioning analysis, replay/injection on unauthenticated nodes, default-key brute-force on test deployments, and home-automation hub pivots. Use when targeting Z-Wave smart home devices (door locks, sensors, garage controllers) — common in mid-2010s smart home deployments still in production.
Install
npx skills add SnailSploit/Claude-Red --skill offensive-z-wave -a claude-code
Installs to .claude/skills/offensive-z-wave/ · Each command fetches the skill straight from GitHub with the open skills CLI.
Byte-identical to the scanned commit, with the repository’s licence and a SOURCE.txt.
Want your agent to suggest skills while you type? See how to use skills from your IDE.
Safety checks on SKILL.md
No warnings.
Why 92
aiqbench computes the trust score from public signals. It is not a security audit, so read a skill before you install it.
Similar skills
Closest to this one by what they do and when they are used.
- offensive-iotSnailSploit/Claude-RedIoT and embedded device security testing methodology. Covers hardware reconnaissance (UART, JTAG, SWD, SPI flash, I2C EEPROM, eMMC chip-off), firmware acquisition (vendor portals, OTA capture, flash dump, binwalk extraction), firmware analysis (filesystem mounting, binary triage, hardcoded secrets, default credential discovery), bootloader attacks (U-Boot console, secure-boot bypass, fault injection), runtime attacks on embedded Linux/RTOS (busybox CVEs, MTD writes, /dev/mem), wireless protocol attacks (Zigbee, BLE, Z-Wave, LoRaWAN, Thread/Matter, sub-GHz), MQTT/CoAP/Modbus/BACnet/OPC-UA exploitation, mobile companion app analysis, cloud-IoT API abuse, and side-channel/glitching basics. Use for IoT pentest, smart-home assessment, ICS/OT testing, or embedded vulnerability research.Security★ 7.7K
- offensive-zigbee-thread-matterSnailSploit/Claude-RedZigbee, Thread, and Matter mesh-protocol attack methodology — IEEE 802.15.4 sniffing with TI CC2531 / CC2540 / Sonoff Zigbee Dongle E, KillerBee toolkit, Touchlink commissioning abuse with the well-known transport key, replay/injection attacks, Zigbee Cluster Library command abuse for door locks and bulbs, Thread network credential theft, Matter commissioning chain analysis, and 6LoWPAN/IPv6 routing exploitation. Use when targeting smart-home or commercial mesh deployments, Zigbee-based door locks, lighting, or sensor networks.DevOps★ 7.7K
- offensive-bluetooth-classicSnailSploit/Claude-RedBluetooth Classic (BR/EDR) attack methodology — device discovery, service enumeration via SDP, LMP/L2CAP layer attacks, legacy PIN cracking (BlueBorne / KNOB), Bluetooth file-transfer abuse (BlueSnarfing legacy), unauthenticated profile abuse (HSP, HFP, OPP), and modern relevance against older industrial / automotive / accessory targets. Use when in-scope devices use Bluetooth Classic (Bluetooth ≤ 4.0 BR/EDR) — common in legacy car kits, industrial sensors, older medical devices, and audio accessories.Media★ 7.7K
- offensive-bluetooth-bleSnailSploit/Claude-RedBluetooth Low Energy (BLE) attack methodology — GATT enumeration, characteristic read/write without auth, pairing downgrade (Just Works forced), LE Secure Connections bypass, MITM via active relay, sniffing with Sniffle (TI CC1352) / Ubertooth / Frontline, encryption key extraction (LE Legacy Pairing crackable, LE Secure Connections strong), proximity authentication abuse (cars, locks), and companion-app trust analysis. Use for IoT BLE devices, smart locks, fitness trackers, medical devices, BLE beacons, or any device pairing over BLE.Science★ 7.7K
- offensive-lorawan-sub-ghzSnailSploit/Claude-RedLoRaWAN and sub-GHz (433 / 868 / 915 MHz) attack methodology — LoRaWAN ABP/OTAA join attack, network/session key reuse, frame counter replay, downlink injection on TTN/Helium-style networks, sub-GHz protocol replay (KeeLoq garage doors, fixed-code remotes, TPMS spoofing, smart plug telemetry), HackRF / RTL-SDR / Flipper Zero workflows, signal analysis with Inspectrum / Universal Radio Hacker, and reconstruction of proprietary packet formats. Use for LoRaWAN deployments (smart cities, asset tracking, industrial telemetry), or any wireless device using the unlicensed 433/868/915 MHz bands (garage openers, doorbells, IoT sensors, RC equipment).DevOps★ 7.7K
- offensive-wpsSnailSploit/Claude-RedWPS (Wi-Fi Protected Setup) PIN attack methodology — Pixie Dust offline attack against vulnerable chipsets (Ralink, Realtek, Broadcom, MediaTek), online PIN brute-force with reaver/bully, lockout handling, time-of-day evasion, WPS push-button vulnerability windows, and PIN-to-PSK derivation. Use when a target SOHO router exposes WPS — common on consumer ISP gear, often left enabled by default even when WPS attacks have been known for over a decade.Security★ 7.7K
Ratings & reviews
—
no reviews
Tried this skill? Rate it to help others. Sign in
Discussion
Join the discussion. Sign in