Skip to content
aiqbench takeAI Products

aiqbench analysis

This research advances whole-body Model Predictive Control for floating-base robots, enabling safe physical human-robot interaction without accumulating steady-state errors under sustained contact forces. By integrating centroidal planning with a Kalman-augmented disturbance rejection layer, the method achieves high-frequency operation suitable for dynamic humanoid platforms like bipeds and Unitree G1 units. The work represents a significant step forward in control theory specifically tailored to next-generation autonomous robots capable of collaborative tasks.
Source coveringarXiv
What this isA model's reading of the article and related coverage, written for aiqbench. Not the publisher's words.

Whole-Body Impedance Model Predictive Control for Safe Physical Human--Robot Interaction on Floating-Base Platforms

arXiv3 min read

arXiv:2606.14617v1 Announce Type: new Abstract: Floating-base robots must balance under rigid contact constraints while interacting safely with humans. Existing whole-body control~(WBC) frameworks allocate the full joint space to locomotion or rely on fixed-gain impedance feedback that accumulates steady-state error under sustained physical human--robot interaction~(pHRI) forces. This paper extends the authors' fixed-base two-layer Impedance MPC to floating-base platforms through a three-level architecture: a centroidal MPC plans contact forces over a 500\,ms horizon; a priority-driven WBC layer resolves balance into joint torques through contact-consistent null-space projection; and the residual null space is governed by a receding-horizon quadratic program~(QP) that predicts and rejects pHRI disturbances using a Kalman-augmented state. A contact-consistent feedback linearization reduces the arm end-effector plant to a double integrator with a \emph{constant} state matrix within each contact mode, enabling offline precomputation of the QP cost and ${\geq}1$\,kHz operation. A covariance-inflation protocol preserves the disturbance estimate across contact-mode switches, guaranteeing zero steady-state error under bounded constant pHRI loads, and an Impedance Equivalence Theorem shows the infinite-horizon limit recovers a classical task-space impedance law whose effective mass, damping, and stiffness adapt to posture and contact configuration. Simulations on a 17-DOF biped and the Unitree G1 humanoid validate the design.

Abstract:Floating-base robots must balance under rigid contact constraints while interacting safely with humans. Existing whole-body control~(WBC) frameworks allocate the full joint space to locomotion or rely on fixed-gain impedance feedback that accumulates steady-state error under sustained physical human--robot interaction~(pHRI) forces. This paper extends the authors' fixed-base two-layer Impedance MPC to floating-base platforms through a three-level architecture: a centroidal MPC plans contact forces over a 500\,ms horizon; a priority-driven WBC layer resolves balance into joint torques through contact-consistent null-space projection; and the residual null space is governed by a receding-horizon quadratic program~(QP) that predicts and rejects pHRI disturbances using a Kalman-augmented state. A contact-consistent feedback linearization reduces the arm end-effector plant to a double integrator with a \emph{constant} state matrix within each contact mode, enabling offline precomputation of the QP cost and ${\geq}1$\,kHz operation. A covariance-inflation protocol preserves the disturbance estimate across contact-mode switches, guaranteeing zero steady-state error under bounded constant pHRI loads, and an Impedance Equivalence Theorem shows the infinite-horizon limit recovers a classical task-space impedance law whose effective mass, damping, and stiffness adapt to posture and contact configuration. Simulations on a 17-DOF biped and the Unitree G1 humanoid validate the design.

Robotics (cs.RO); Systems and Control (eess.SY)

arXiv:2606.14617 [cs.RO]

(or arXiv:2606.14617v1 [cs.RO] for this version)

https://doi.org/10.48550/arXiv.2606.14617 Focus to learn more arXiv-issued DOI via DataCite (pending registration)

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.

Full text under the publisher's open licence · 289 words

Related coverage