Skip to content
aiqbench takeQuantum Comms

aiqbench analysis

This research presents a significant advancement in quantum sensing by utilizing entangled photons to eliminate mechanical scanning in mid-infrared spectroscopy. By leveraging frequency-domain measurements and robust reconstruction algorithms, the method achieves a 21.8-fold improvement in signal-to-noise ratio while enabling hyperspectral imaging at millisecond speeds. This breakthrough demonstrates how quantum metrology can overcome fundamental design constraints of classical optical systems for rapid chemical analysis.
Source coveringarXiv
What this isA model's reading of the article and related coverage, written for aiqbench. Not the publisher's words.

Scanless quantum Fourier-transform mid-infrared spectroscopy for rapid high-sensitivity hyperspectral mapping

arXiv3 min read

arXiv:2607.17964v1 Announce Type: cross Abstract: Fourier-transform infrared (FTIR) spectroscopy is a well-established technique for qualitative and quantitative chemical analysis. Classical FTIR systems rely, however, on direct mid-infrared (mid-IR) scan-based time-domain measurements of coherence functions; thus, the signal-to-noise ratio and measurement speed are constrained by design. In this paper, we demonstrate a scanless quantum FTIR (sQFTIR) technique that exploits principles of metrology with entangled photons to circumvent the limitations inherent to classical FTIR systems. The approach exploits the interferometric nature of the sensing paradigm and relies on frequency-domain measurements performed with a static, low-gain nonlinear interferometer. A robust reconstruction algorithm is used to retrieve time-domain signals and reconstruct respective mid-infrared (mid-IR) spectra (3000$~$cm$^{-1}$ to 2380$~$cm$^{-1}$) from near-IR measurements (approx. 780$~$nm to 820$~$nm). The suggested sQFTIR protocol eliminates the need for optical delay scanning and leverages inherent mapping between the related domains. In the theoretical section, we evaluate the intrinsic signal-to-noise advantage of the proposed method over conventional scan-based time-domain measurements; a difference of 26.8 dB (factor of 21.8) is demonstrated. Building on the enhanced sensitivity of the scheme, we demonstrate rapid sQFTIR-based hyperspectral imaging with a spatial resolution of 12.3$~\mu$m and a spectral resolution down to 8$~$cm$^{-1}$. Hyperspectral mapping of human colon tissue, microplastics, and multilayer polymer samples composed of polypropylene and ethylene vinyl alcohol yield high-quality single-pixel spectra with acquisition times down to 10$~$ms.

Abstract:Fourier-transform infrared (FTIR) spectroscopy is a well-established technique for qualitative and quantitative chemical analysis. Classical FTIR systems rely, however, on direct mid-infrared (mid-IR) scan-based time-domain measurements of coherence functions; thus, the signal-to-noise ratio and measurement speed are constrained by design. In this paper, we demonstrate a scanless quantum FTIR (sQFTIR) technique that exploits principles of metrology with entangled photons to circumvent the limitations inherent to classical FTIR systems. The approach exploits the interferometric nature of the sensing paradigm and relies on frequency-domain measurements performed with a static, low-gain nonlinear interferometer. A robust reconstruction algorithm is used to retrieve time-domain signals and reconstruct respective mid-infrared (mid-IR) spectra (3000$~$cm$^{-1}$ to 2380$~$cm$^{-1}$) from near-IR measurements (approx. 780$~$nm to 820$~$nm). The suggested sQFTIR protocol eliminates the need for optical delay scanning and leverages inherent mapping between the related domains. In the theoretical section, we evaluate the intrinsic signal-to-noise advantage of the proposed method over conventional scan-based time-domain measurements; a difference of 26.8 dB (factor of 21.8) is demonstrated. Building on the enhanced sensitivity of the scheme, we demonstrate rapid sQFTIR-based hyperspectral imaging with a spatial resolution of 12.3$~\mu$m and a spectral resolution down to 8$~$cm$^{-1}$. Hyperspectral mapping of human colon tissue, microplastics, and multilayer polymer samples composed of polypropylene and ethylene vinyl alcohol yield high-quality single-pixel spectra with acquisition times down to 10$~$ms.

Optics (physics.optics); Instrumentation and Detectors (physics.ins-det); Quantum Physics (quant-ph)

arXiv:2607.17964 [physics.optics]

(or arXiv:2607.17964v1 [physics.optics] for this version)

https://doi.org/10.48550/arXiv.2607.17964 Focus to learn more arXiv-issued DOI via DataCite (pending registration)

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.

Full text under the publisher's open licence · 319 words

Related coverage