Off-topic for aiqbench
This story was gathered from a source we follow but falls outside AI and quantum coverage, so there is no aiqbench take for it.
Safe-Ballbot: Tilt-Consistent MPC with Control Barrier Functions for Ballbot Navigation
arXiv:2611.03307v1 Announce Type: new Abstract: Ball-balancing robots (ballbots) must lean to accelerate, and the lean is limited by the wheel torques and by safety. Planners that use the full robot model are expensive, while planners that ignore the balance dynamics produce references that cannot be followed. This paper presents a two-layer navigation scheme for a three-omni-wheel ballbot. The upper layer is a model predictive controller on a \emph{jerk model} of the ball position, with discrete-time control barrier functions for static, moving, rotating and concave obstacles. The lower layer is a hierarchical sliding mode controller with an extended state observer and a robust exponential control barrier function on the tilt (HSMC-ESO-ECBF). The layers are linked by an acceleration bound derived in closed form from the largest steady tilt that the barrier function admits, so that the plan never asks for a lean the tracker refuses. For obstacles whose motion is only predicted, the obstacles are inflated by conformal prediction radii that bound the prediction error with a prescribed probability. In MuJoCo, with omni-wheel roller contacts and torque saturation, the scheme keeps at least $10$\,cm of clearance, tracks the plan within $2$\,cm RMS, keeps the tilt below the limit and plans in $9$--$12$\,ms, $10$--$15$ times faster than a full-model nonlinear MPC that enters the inflated obstacles; with predicted obstacles, the conformal inflation removes the collisions of a constant-velocity predictor in $30$ random crossing scenarios and reduces them in an endless run on a closed path.The source code and video illustrations are available at https://safe-ballbot.github.io
Abstract:Ball-balancing robots (ballbots) must lean to accelerate, and the lean is limited by the wheel torques and by safety. Planners that use the full robot model are expensive, while planners that ignore the balance dynamics produce references that cannot be followed. This paper presents a two-layer navigation scheme for a three-omni-wheel ballbot. The upper layer is a model predictive controller on a \emph{jerk model} of the ball position, with discrete-time control barrier functions for static, moving, rotating and concave obstacles. The lower layer is a hierarchical sliding mode controller with an extended state observer and a robust exponential control barrier function on the tilt (HSMC-ESO-ECBF). The layers are linked by an acceleration bound derived in closed form from the largest steady tilt that the barrier function admits, so that the plan never asks for a lean the tracker refuses. For obstacles whose motion is only predicted, the obstacles are inflated by conformal prediction radii that bound the prediction error with a prescribed probability. In MuJoCo, with omni-wheel roller contacts and torque saturation, the scheme keeps at least $10$\,cm of clearance, tracks the plan within $2$\,cm RMS, keeps the tilt below the limit and plans in $9$--$12$\,ms, $10$--$15$ times faster than a full-model nonlinear MPC that enters the inflated obstacles; with predicted obstacles, the conformal inflation removes the collisions of a constant-velocity predictor in $30$ random crossing scenarios and reduces them in an endless run on a closed this http URL source code and video illustrations are available at this https URL
Robotics (cs.RO); Systems and Control (eess.SY)
arXiv:2611.03307 [cs.RO]
(or arXiv:2611.03307v1 [cs.RO] for this version)
https://doi.org/10.48550/arXiv.2611.03307 Focus to learn more arXiv-issued DOI via DataCite (pending registration)
arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.
Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.
Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.
Full text under the publisher's open licence · 348 words