aiqbench analysis
This study applies residual deep reinforcement learning to enhance computed torque control in cable-driven rehabilitation robots, specifically addressing model uncertainties and external disturbances. By using a bounded Deep Deterministic Policy Gradient policy to supply only compensating torque, the framework preserves the interpretability of traditional control structures while improving trajectory tracking and disturbance rejection. The results validate this hybrid approach as a practical strategy for robust simulation-based control in medical robotics, though further experimental validation is needed to address identified constraint limitations.
Residual Deep Reinforcement Learning-Based Computed Torque Control for a Cable-Driven Lower-Limb Rehabilitation Robot under Disturbances and Parametric Uncertainties
arXiv:2608.26739v1 Announce Type: new Abstract: Accurate trajectory tracking in cable-driven lower-limb rehabilitation robots is challenging because model uncertainty, external disturbances, joint constraints, and pull-only cable actuation can degrade nominal control performance. Conventional model-based controllers provide an interpretable control structure but remain sensitive to model mismatch, whereas fully learning-based control can reduce transparency and complicate constraint-aware operation. This study proposes a residual deep reinforcement learning-enhanced computed torque control framework in which computed torque control generates the nominal command and a bounded Deep Deterministic Policy Gradient policy supplies only an additional compensating torque. The approach is evaluated in simulation under nominal, uncertain, disturbed, combined, and generalization conditions, together with trajectory-tracking, joint-limit, cable-demand, workspace-feasibility, and cable-Jacobian diagnostics. Across the evaluated conditions, the residual controller improves tracking and disturbance rejection relative to computed torque control while preserving the interpretable model-based command structure and satisfying the reported feasibility checks in the representative evaluation. Broader tests indicate that tracking improvements can persist beyond the representative case while also exposing trajectory-dependent constraint limitations. These results support bounded residual learning as a practical robustness-enhancement strategy for simulation-based rehabilitation robot control and motivate further constraint-aware and experimental validation.
Abstract:Accurate trajectory tracking in cable-driven lower-limb rehabilitation robots is challenging because model uncertainty, external disturbances, joint constraints, and pull-only cable actuation can degrade nominal control performance. Conventional model-based controllers provide an interpretable control structure but remain sensitive to model mismatch, whereas fully learning-based control can reduce transparency and complicate constraint-aware operation. This study proposes a residual deep reinforcement learning-enhanced computed torque control framework in which computed torque control generates the nominal command and a bounded Deep Deterministic Policy Gradient policy supplies only an additional compensating torque. The approach is evaluated in simulation under nominal, uncertain, disturbed, combined, and generalization conditions, together with trajectory-tracking, joint-limit, cable-demand, workspace-feasibility, and cable-Jacobian diagnostics. Across the evaluated conditions, the residual controller improves tracking and disturbance rejection relative to computed torque control while preserving the interpretable model-based command structure and satisfying the reported feasibility checks in the representative evaluation. Broader tests indicate that tracking improvements can persist beyond the representative case while also exposing trajectory-dependent constraint limitations. These results support bounded residual learning as a practical robustness-enhancement strategy for simulation-based rehabilitation robot control and motivate further constraint-aware and experimental validation.
32 pages, 24 figures, 13 tables. Preprint
Robotics (cs.RO); Systems and Control (eess.SY)
arXiv:2608.26739 [cs.RO]
(or arXiv:2608.26739v1 [cs.RO] for this version)
https://doi.org/10.48550/arXiv.2608.26739 Focus to learn more arXiv-issued DOI via DataCite (pending registration)
arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.
Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.
Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.
Full text under the publisher's open licence · 288 words
Related coverage

The Machines that Make the Machines
NVIDIA · Oct 7, 2026

News
Quantum Computing Report · Jul 25, 2026

Echoverse: Deep, evolving environments for computer-use agents
Microsoft Research · Jul 30, 2026
KinematicRL: A Sim-to-Real Reinforcement Learning Framework For Social Navigation With Kinodynamic Feasibility
arXiv · Jun 11, 2026