Skip to content
aiqbench takeAI Products

aiqbench analysis

This research advances autonomous vehicle control by replacing direct friction estimation with a stability-aware adaptive velocity planning algorithm, enabling real-time adjustments to track conditions and mechanical tolerances. Evaluated on a Formula Student race car, the method achieved significant lap time improvements while maintaining driving stability under high-speed constraints.
Source coveringarXiv
What this isA model's reading of the article and related coverage, written for aiqbench. Not the publisher's words.

Pushing the Performance Limits in Autonomous Racing: Continuous Stability-Aware Adaptive Velocity Planning in Formula Student Driverless

arXiv2 min read

arXiv:2606.10733v2 Announce Type: replace Abstract: In autonomous racing, especially in competitions such as Formula Student Driverless, precise planning of the target velocity of a race car is crucial for competitive lap times and stable driving behavior. Especially at high speeds, Velocity Planning (VP) is a significant challenge as it has to be performed in real time, taking into account track layouts, environmental influences, mechanical tolerances, and the resulting control inaccuracies. In this paper, we present a novel approach to VP that dynamically adapts to such changing conditions. Instead of estimating the physical Tire-Road Friction Coefficient (TRFC), a continuous scaling factor is inferred indirectly from vehicle stability. This factor not only reflects the effective tire-road interaction but also captures effects of control inaccuracies. From this, we generate a continuous friction map, which serves as a robust, adaptive basis for computing the optimal target speed, accounting for both vehicle and environmental limits. Our proposed approach was evaluated on a real Formula Student race car, showing a lap time improvement of 35 % over ten laps and an average increase of 8 % compared to a non-adaptive approach.

Abstract:In autonomous racing, especially in competitions such as Formula Student Driverless, precise planning of the target velocity of a race car is crucial for competitive lap times and stable driving behavior. Especially at high speeds, Velocity Planning (VP) is a significant challenge as it has to be performed in real time, taking into account track layouts, environmental influences, mechanical tolerances, and the resulting control inaccuracies. In this paper, we present a novel approach to VP that dynamically adapts to such changing conditions. Instead of estimating the physical Tire-Road Friction Coefficient (TRFC), a continuous scaling factor is inferred indirectly from vehicle stability. This factor not only reflects the effective tire-road interaction but also captures effects of control inaccuracies. From this, we generate a continuous friction map, which serves as a robust, adaptive basis for computing the optimal target speed, accounting for both vehicle and environmental limits. Our proposed approach was evaluated on a real Formula Student race car, showing a lap time improvement of 35 % over ten laps and an average increase of 8 % compared to a non-adaptive approach.

Robotics (cs.RO)

arXiv:2606.10733 [cs.RO]

(or arXiv:2606.10733v2 [cs.RO] for this version)

https://doi.org/10.48550/arXiv.2606.10733 Focus to learn more arXiv-issued DOI via DataCite

2026 IEEE Intelligent Vehicles Symposium (IV), 2026, pp. 795-801

https://doi.org/10.1109/IV66570.2026.11623966 Focus to learn more DOI(s) linking to related resources

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.

Full text under the publisher's open licence · 290 words

Related coverage