aiqbench analysis
The paper extends physics-informed neural networks from forward prediction to inverse identification of tensegrity prestress, including during cable slackening, which is a nonsmooth regime where earlier methods fail. Its main evidence is simulated frames plus two measured structures, with errors reported as median or RMS values and no comparison to strong baselines in the abstract. Readers in ML and structural dynamics should note that the method's identifiability depends on the record content, which the authors assess with a Fisher-information analysis beforehand.
Physics-Informed Identification of Tensegrity Prestress across Taut-Slack Transitions
arXiv:2611.04007v1 Announce Type: new Abstract: Prestress governs the stability, stiffness, and dynamic behavior of tensegrity structures, but it is not directly observable from sparse structural measurements, and it may decrease during service life. Under strong excitation, the cables may slacken and the dynamics become nonsmooth. Existing identification methods are limited to the taut regime, and physics-informed networks for tensegrities solve only the forward problem of predicting the response from known member parameters. This study formulates the inverse problem. Neural networks are trained on the equation-of-motion residual in constrained Cartesian coordinates, where the mass matrix is constant and the force densities enter linearly. The force densities, damping, and axial stiffness are trainable parameters, and the tension-only cable law is kept. A Fisher-information analysis shows, before inversion, which member parameters a record can determine. The method is tested on simulated planar tensegrity frames with up to five modules and a three-dimensional prism, and on measured records of a biomimetic leg and a full-scale tensegrity simplex. On the one-module frame, the identifiable force densities are recovered within 1.5% from noisy accelerations at half the free coordinates, on records with and without taut-slack transitions. Records with transitions determine members that taut records leave undetermined. On the five-module frame, a 16-cable two-span bridge, the median force-density error rises moderately, to 4.2%. On measured records, an identified spring stiffness is within 0.1% of its independently measured value on average, and the identified simplex prestress at 13 levels agrees with its cable force transducers to 2.9% root-mean-square.
Abstract:Prestress governs the stability, stiffness, and dynamic behavior of tensegrity structures, but it is not directly observable from sparse structural measurements, and it may decrease during service life. Under strong excitation, the cables may slacken and the dynamics become nonsmooth. Existing identification methods are limited to the taut regime, and physics-informed networks for tensegrities solve only the forward problem of predicting the response from known member parameters. This study formulates the inverse problem. Neural networks are trained on the equation-of-motion residual in constrained Cartesian coordinates, where the mass matrix is constant and the force densities enter linearly. The force densities, damping, and axial stiffness are trainable parameters, and the tension-only cable law is kept. A Fisher-information analysis shows, before inversion, which member parameters a record can determine. The method is tested on simulated planar tensegrity frames with up to five modules and a three-dimensional prism, and on measured records of a biomimetic leg and a full-scale tensegrity simplex. On the one-module frame, the identifiable force densities are recovered within 1.5% from noisy accelerations at half the free coordinates, on records with and without taut-slack transitions. Records with transitions determine members that taut records leave undetermined. On the five-module frame, a 16-cable two-span bridge, the median force-density error rises moderately, to 4.2%. On measured records, an identified spring stiffness is within 0.1% of its independently measured value on average, and the identified simplex prestress at 13 levels agrees with its cable force transducers to 2.9% root-mean-square.
Machine Learning (cs.LG); Computational Engineering, Finance, and Science (cs.CE); Signal Processing (eess.SP); Fluid Dynamics (physics.flu-dyn)
arXiv:2611.04007 [cs.LG]
(or arXiv:2611.04007v1 [cs.LG] for this version)
https://doi.org/10.48550/arXiv.2611.04007 Focus to learn more arXiv-issued DOI via DataCite (pending registration)
arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.
Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.
Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.
Full text under the publisher's open licence · 351 words