Skip to content
aiqbench takeAI Products

aiqbench analysis

This research presents PACT, a co-design methodology that simultaneously optimizes the mechanical structure of a 17-servo robot hand and its posture retargeting algorithm to better replicate human grasping postures. By enforcing full-finger correspondence during optimization, the resulting hardware achieves significantly lower kinematic error and higher payload capacity than conventional designs, directly enhancing the fidelity required for teleoperated imitation learning tasks. The work bridges mechanical engineering and machine learning by demonstrating how hardware constraints can be integrated into the training data collection process to improve downstream policy performance.
Source coveringarXiv
What this isA model's reading of the article and related coverage, written for aiqbench. Not the publisher's words.

PACT: Posture-Aligned Co-Design Technique for Hand Configuration and Retargeting in Multi-Finger Imitation Learning

arXiv3 min read

arXiv:2610.18443v1 Announce Type: new Abstract: The fidelity of teleoperated demonstrations used for imitation learning is determined by how faithfully a robot hand can replicate the operator's posture. The posture retargeting law that the robot will execute is typically selected only once the hardware has been finalized, and conventional hand designs often neglect human-like grasping postures. We introduce PACT, an optimization based on human grasping postures that jointly optimizes the mechanical parameters of a 17-servo robot hand (link lengths, joint offsets, mounting angles, and base placements) and its nonlinear posture retargeter (a linear human-to-robot joint map, per-joint posture-IK weights, and damping). The optimization enforces full-finger correspondence (MCP, PIP, DIP, and tip of each finger) to human poses from the DexYCB dataset, and is constrained by servo interference, assembly clearances, and flat-hand protrusion, so the resulting design can be physically assembled. We fabricate the PACT Hand and validate it through teleoperation experiments and an imitation-learning demonstration. The hand reproduces all human hand keypoints with a kinematic RMSE of 3.9 mm, compared to 12.8 mm for the LEAP Hand baseline, and keeps all fingertips within 10 mm on every grasping posture, while the baseline achieves this for only 21.6% of the poses. Under matched per-joint torque limits, it lifts twice the baseline payload, 2 kg against 1 kg, and deforms a held paper cup seven times less, reaching a deformation level comparable to a human hand. It also achieves an 86% grasping success rate on YCB daily objects, compared to 64% for the baseline. Finally, as a demonstration, an imitation-learning policy trained on demonstrations collected with the PACT Hand achieved a 75% success rate at held-out placements in a can pick-and-place task. Project page: https://pact-hand-2027.github.io

Abstract:The fidelity of teleoperated demonstrations used for imitation learning is determined by how faithfully a robot hand can replicate the operator's posture. The posture retargeting law that the robot will execute is typically selected only once the hardware has been finalized, and conventional hand designs often neglect human-like grasping postures. We introduce PACT, an optimization based on human grasping postures that jointly optimizes the mechanical parameters of a 17-servo robot hand (link lengths, joint offsets, mounting angles, and base placements) and its nonlinear posture retargeter (a linear human-to-robot joint map, per-joint posture-IK weights, and damping). The optimization enforces full-finger correspondence (MCP, PIP, DIP, and tip of each finger) to human poses from the DexYCB dataset, and is constrained by servo interference, assembly clearances, and flat-hand protrusion, so the resulting design can be physically assembled. We fabricate the PACT Hand and validate it through teleoperation experiments and an imitation-learning demonstration. The hand reproduces all human hand keypoints with a kinematic RMSE of 3.9 mm, compared to 12.8 mm for the LEAP Hand baseline, and keeps all fingertips within 10 mm on every grasping posture, while the baseline achieves this for only 21.6% of the poses. Under matched per-joint torque limits, it lifts twice the baseline payload, 2 kg against 1 kg, and deforms a held paper cup seven times less, reaching a deformation level comparable to a human hand. It also achieves an 86% grasping success rate on YCB daily objects, compared to 64% for the baseline. Finally, as a demonstration, an imitation-learning policy trained on demonstrations collected with the PACT Hand achieved a 75% success rate at held-out placements in a can pick-and-place task. Project page: this https URL

9 pages, 6 figures, 2 tables. Submitted to IEEE ICRA 2027. Project page: this https URL

Robotics (cs.RO)

arXiv:2610.18443 [cs.RO]

(or arXiv:2610.18443v1 [cs.RO] for this version)

https://doi.org/10.48550/arXiv.2610.18443 Focus to learn more arXiv-issued DOI via DataCite (pending registration)

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.

Full text under the publisher's open licence · 388 words

Related coverage