Skip to content
aiqbench takeQuantum Computing

aiqbench analysis

This research establishes an analytic design rule for noise-aware feedback control in quantum-limited optomechanical systems, specifically addressing the tradeoff between stabilization and noise amplification under finite measurement bandwidth. The study demonstrates that high mechanical quality factors alone are insufficient for optimal performance without accounting for controller cutoff frequencies and phase lags inherent in real-world detectors. These findings provide critical design constraints for engineers developing next-generation quantum sensors and interferometers where imprecision-backaction limits must be rigorously managed.
Source coveringarXiv
What this isA model's reading of the article and related coverage, written for aiqbench. Not the publisher's words.

Noise-aware derivative feedback of a harmonic oscillator under quantum-limited position measurement

arXiv3 min read

arXiv:2609.13988v1 Announce Type: new Abstract: We study measurement-based feedback control of a damped harmonic oscillator, motivated by optomechanical and interferometric position measurements, in which feedback is synthesized from a displacement measurement. For a band-limited derivative controller, the loop shapes the mechanical susceptibility and reinjects measurement noise, creating a tradeoff between stabilization and noise amplification. We present a compact classical formulation that isolates this tradeoff in the closed-loop displacement spectrum and identifies the parameters governing resonance suppression versus noise-driven actuation. We then extend the same topology to a quantum-limited position detector, enforcing the imprecision-backaction constraint and introducing finite measurement bandwidth that regularizes high-frequency noise reinjection and adds phase lag in the feedback path. In the high-$Q$ regime we obtain an analytic design rule for the optimal feedback gain at fixed controller and measurement bandwidths and compare it with full-spectrum calculations. The comparison shows that a high mechanical quality factor alone does not guarantee quantitative agreement: the accuracy of the near-resonant approximation depends strongly on the controller and measurement bandwidths. Because finite measurement bandwidth changes both the magnitude and phase of the feedback loop, the analysis separates the near-resonant damping contribution from imprecision-noise reinjection and shows that positive near-resonant feedback damping requires the product of the controller cutoff and measurement bandwidth to exceed the square of the mechanical resonance frequency. Finally, we present a dimensionless map of the gain-optimized high-$Q$ occupation and compare its predictions with full-spectrum optimization. All analytical gains evaluated in this map satisfy the full closed-loop stability criterion for these parameters.

Abstract:We study measurement-based feedback control of a damped harmonic oscillator, motivated by optomechanical and interferometric position measurements, in which feedback is synthesized from a displacement measurement. For a band-limited derivative controller, the loop shapes the mechanical susceptibility and reinjects measurement noise, creating a tradeoff between stabilization and noise amplification. We present a compact classical formulation that isolates this tradeoff in the closed-loop displacement spectrum and identifies the parameters governing resonance suppression versus noise-driven actuation. We then extend the same topology to a quantum-limited position detector, enforcing the imprecision-backaction constraint and introducing finite measurement bandwidth that regularizes high-frequency noise reinjection and adds phase lag in the feedback path. In the high-$Q$ regime we obtain an analytic design rule for the optimal feedback gain at fixed controller and measurement bandwidths and compare it with full-spectrum calculations. The comparison shows that a high mechanical quality factor alone does not guarantee quantitative agreement: the accuracy of the near-resonant approximation depends strongly on the controller and measurement bandwidths. Because finite measurement bandwidth changes both the magnitude and phase of the feedback loop, the analysis separates the near-resonant damping contribution from imprecision-noise reinjection and shows that positive near-resonant feedback damping requires the product of the controller cutoff and measurement bandwidth to exceed the square of the mechanical resonance frequency. Finally, we present a dimensionless map of the gain-optimized high-$Q$ occupation and compare its predictions with full-spectrum optimization. All analytical gains evaluated in this map satisfy the full closed-loop stability criterion for these parameters.

Quantum Physics (quant-ph); Optics (physics.optics)

arXiv:2609.13988 [quant-ph]

(or arXiv:2609.13988v1 [quant-ph] for this version)

https://doi.org/10.48550/arXiv.2609.13988 Focus to learn more arXiv-issued DOI via DataCite (pending registration)

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.

Full text under the publisher's open licence · 343 words

Related coverage