Skip to content
aiqbench takeAI Products

aiqbench analysis

This research advances autonomous 3D scanning by integrating real-time Structure-from-Motion feedback with Neural Radiance Fields on sub-100 gram UAVs, enabling high-fidelity reconstruction in constrained environments. The system's closed-loop trajectory adaptation dynamically optimizes flight paths to capture missing data, effectively overcoming the payload and autonomy limitations that previously restricted micro-drones from complex scanning tasks.
Source coveringarXiv
What this isA model's reading of the article and related coverage, written for aiqbench. Not the publisher's words.

Neural 3D Object Reconstruction with Small-Scale Unmanned Aerial Vehicles

arXiv3 min read

arXiv:2509.12458v3 Announce Type: replace Abstract: Miniaturized Uncrewed Aerial Vehicles (UAVs) can access indoor and hard-to-reach spaces, but severe constraints on payload and autonomy have limited their use in demanding tasks such as high-quality 3D reconstruction. We introduce a novel system architecture that enables autonomous, high-fidelity 3D scanning of static objects with sub-100 gram UAVs. Our core innovation lies in a closed-loop active viewpoint selection framework specifically tailored for ultra-constrained micro-platforms, advancing beyond standard static or offline active reconstruction methods. The framework establishes a dual-reconstruction pipeline that creates a real-time (RT) feedback loop between data capture and flight control. A near-RT process uses Structure-from-Motion (SfM) to generate an instantaneous point-cloud of the object. A systematic trajectory adaptation algorithm analyzes the model quality on the fly and dynamically adapts the UAV's trajectory based on parameterized spatial partitioning to intelligently capture new images of poorly covered areas, ensuring comprehensive acquisition. For the final, high-fidelity output, a non-RT pipeline employs a Neural Radiance Fields (NeRF)-based Neural 3D Reconstruction (N3DR) approach, fusing SfM-derived camera poses with precise external location data, evaluated across both radio-based Ultra Wideband (UWB) and visual motion-capture setups, to correct sensor noise and achieve superior accuracy. We implemented and validated this architecture using Crazyflie 2.1 UAVs. Our experiments, conducted in both single- and multi-UAV configurations show that algorithmic dynamic trajectory adaptation consistently improves reconstruction quality over static flight paths. This work demonstrates a scalable and autonomous solution that unlocks the potential of miniaturized UAVs for fine-grained 3D reconstruction, a capability previously reserved for much larger platforms.

Abstract:Miniaturized Uncrewed Aerial Vehicles (UAVs) can access indoor and hard-to-reach spaces, but severe constraints on payload and autonomy have limited their use in demanding tasks such as high-quality 3D reconstruction. We introduce a novel system architecture that enables autonomous, high-fidelity 3D scanning of static objects with sub-100 gram UAVs. Our core innovation lies in a closed-loop active viewpoint selection framework specifically tailored for ultra-constrained micro-platforms, advancing beyond standard static or offline active reconstruction methods. The framework establishes a dual-reconstruction pipeline that creates a real-time (RT) feedback loop between data capture and flight control. A near-RT process uses Structure-from-Motion (SfM) to generate an instantaneous point-cloud of the object. A systematic trajectory adaptation algorithm analyzes the model quality on the fly and dynamically adapts the UAV's trajectory based on parameterized spatial partitioning to intelligently capture new images of poorly covered areas, ensuring comprehensive acquisition. For the final, high-fidelity output, a non-RT pipeline employs a Neural Radiance Fields (NeRF)-based Neural 3D Reconstruction (N3DR) approach, fusing SfM-derived camera poses with precise external location data, evaluated across both radio-based Ultra Wideband (UWB) and visual motion-capture setups, to correct sensor noise and achieve superior accuracy. We implemented and validated this architecture using Crazyflie 2.1 UAVs. Our experiments, conducted in both single- and multi-UAV configurations show that algorithmic dynamic trajectory adaptation consistently improves reconstruction quality over static flight paths. This work demonstrates a scalable and autonomous solution that unlocks the potential of miniaturized UAVs for fine-grained 3D reconstruction, a capability previously reserved for much larger platforms.

Robotics (cs.RO); Hardware Architecture (cs.AR); Computer Vision and Pattern Recognition (cs.CV); Emerging Technologies (cs.ET); Systems and Control (eess.SY)

arXiv:2509.12458 [cs.RO]

(or arXiv:2509.12458v3 [cs.RO] for this version)

Full text under the publisher's open licence · 275 words

Related coverage