Skip to content
aiqbench takeAI Research

aiqbench analysis

This research addresses a critical bottleneck in robotic imitation learning by introducing MILE, a wearable exoskeleton paired with a corresponding robotic hand that captures high-fidelity visuotactile data. By enabling direct joint-space command transfer without complex inverse kinematics retargeting, the system significantly improves teleoperation success rates for dexterous tasks compared to existing glove or vision-only baselines. The study demonstrates that rich tactile feedback collected via this mechanically isomorphic design directly enhances the performance of downstream AI policies trained on human demonstrations.
Source coveringarXiv
What this isA model's reading of the article and related coverage, written for aiqbench. Not the publisher's words.

MILE: A Mechanically Isomorphic Hand Exoskeleton and Visuotactile Robotic Hand for Data Collection in Dexterous Manipulation

arXiv2 min read

arXiv:2512.00324v5 Announce Type: replace Abstract: Dexterous robotic hands perform complex, contact-rich manipulation. Imitation learning provides a route to such skills, but collecting human demonstrations with accurate hand actions and rich tactile information remains a key bottleneck. We present MILE, a teleoperation-based data-collection system comprising the wearable MILE exoskeleton and the mechanically corresponding MILE-Tac robotic hand. Because human-hand anatomy and wearability place tighter constraints on the high-DoF wearable, our human-first design begins with the MILE exoskeleton, equipped with custom modular joint encoders for accurate joint-angle acquisition. We then design the MILE-Tac robotic hand to share the exoskeleton's selected kinematic topology and joint-axis arrangement while satisfying robot-side implementation constraints, and equip its fingertips with compact visuotactile sensor modules. This correspondence enables direct exoskeleton-to-robot joint-space command transfer without online task-space inverse-kinematics retargeting. During teleoperation, the system synchronously records task-specific visual observations, four fingertip visuotactile streams, robot-hand proprioception, and exoskeleton-derived action commands. In a four-task teleoperation benchmark, MILE achieved a mean success rate of 76%, compared with 28% and 8% for glove-based and vision-based baselines, respectively. For downstream imitation learning, we trained paired ACT and DP policies with and without tactile input on MILE-collected demonstrations. The tactile-input variants achieved higher success rates in all paired evaluations.

Abstract:Dexterous robotic hands perform complex, contact-rich manipulation. Imitation learning provides a route to such skills, but collecting human demonstrations with accurate hand actions and rich tactile information remains a key bottleneck. We present MILE, a teleoperation-based data-collection system comprising the wearable MILE exoskeleton and the mechanically corresponding MILE-Tac robotic hand. Because human-hand anatomy and wearability place tighter constraints on the high-DoF wearable, our human-first design begins with the MILE exoskeleton, equipped with custom modular joint encoders for accurate joint-angle acquisition. We then design the MILE-Tac robotic hand to share the exoskeleton's selected kinematic topology and joint-axis arrangement while satisfying robot-side implementation constraints, and equip its fingertips with compact visuotactile sensor modules. This correspondence enables direct exoskeleton-to-robot joint-space command transfer without online task-space inverse-kinematics retargeting. During teleoperation, the system synchronously records task-specific visual observations, four fingertip visuotactile streams, robot-hand proprioception, and exoskeleton-derived action commands. In a four-task teleoperation benchmark, MILE achieved a mean success rate of 76%, compared with 28% and 8% for glove-based and vision-based baselines, respectively. For downstream imitation learning, we trained paired ACT and DP policies with and without tactile input on MILE-collected demonstrations. The tactile-input variants achieved higher success rates in all paired evaluations.

Robotics (cs.RO); Computer Vision and Pattern Recognition (cs.CV); Human-Computer Interaction (cs.HC)

arXiv:2512.00324 [cs.RO]

(or arXiv:2512.00324v5 [cs.RO] for this version)

https://doi.org/10.48550/arXiv.2512.00324 Focus to learn more arXiv-issued DOI via DataCite

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.

Full text under the publisher's open licence · 297 words

Related coverage