Skip to content
aiqbench takeMachine Learning

aiqbench analysis

FORM introduces a novel machine learning approach for robot manipulation by identifying material properties from a single interaction, drastically reducing setup time from minutes to seconds. This method enables robots to adapt to unfamiliar deformable objects in real-time, a critical advancement for autonomous handling of complex physical tasks. The research bridges the gap between theoretical physics models and practical robotic control through efficient online identification algorithms.
Sources coveringarXiv, Quantum Zeitgeist
What this isA model's reading of the article and related coverage, written for aiqbench. Not the publisher's words.

FORM: Robot Manipulation through Direct Material Law Identification

arXiv3 min read

arXiv:2609.38105v1 Announce Type: new Abstract: When interacting with an unfamiliar deformable material, a robot lacks prior knowledge of its physical properties and how it will respond to applied forces and motion. Rapid online identification is therefore essential for reliable manipulation. We present FORM (From Observed Response to Material laws), which identifies material properties from a single robot interaction and reuses the recovered model to plan manipulation under new actions and geometries. We use weak-form momentum balance to convert observed material motion and contact forces into linear equations in the unknown material parameters. These equations are assembled using the same material point method discretization as the forward simulator, so identification reduces to linear least-squares solves whose solutions can be used directly for prediction without refitting or conversion. Across four material classes, FORM reduces identification time from roughly 10--25 minutes for iterative baselines to 2--5 seconds, while maintaining competitive accuracy on new motions, initial conditions, and geometries. We demonstrate our approach in simulation and on hardware across four manipulation tasks: elastic rod insertion, golf putting with an elastic club, elastoplastic shaping, and target-volume pouring. In each task, the model identified from a single interaction is reused to plan new motions or manipulate a different geometry. FORM estimates elastic properties within 3.4% and elastoplastic properties within 2%, achieves 72.4--77.8% IoU in dough shaping, and keeps mean pouring error at 3.8 mL across target volumes of 60--160 mL.

Abstract:When interacting with an unfamiliar deformable material, a robot lacks prior knowledge of its physical properties and how it will respond to applied forces and motion. Rapid online identification is therefore essential for reliable manipulation. We present FORM (From Observed Response to Material laws), which identifies material properties from a single robot interaction and reuses the recovered model to plan manipulation under new actions and geometries. We use weak-form momentum balance to convert observed material motion and contact forces into linear equations in the unknown material parameters. These equations are assembled using the same material point method discretization as the forward simulator, so identification reduces to linear least-squares solves whose solutions can be used directly for prediction without refitting or conversion. Across four material classes, FORM reduces identification time from roughly 10--25 minutes for iterative baselines to 2--5 seconds, while maintaining competitive accuracy on new motions, initial conditions, and geometries. We demonstrate our approach in simulation and on hardware across four manipulation tasks: elastic rod insertion, golf putting with an elastic club, elastoplastic shaping, and target-volume pouring. In each task, the model identified from a single interaction is reused to plan new motions or manipulate a different geometry. FORM estimates elastic properties within 3.4% and elastoplastic properties within 2%, achieves 72.4--77.8% IoU in dough shaping, and keeps mean pouring error at 3.8 mL across target volumes of 60--160 mL.

9 pages, 6 figures. Project page: this https URL . Code: this https URL

Robotics (cs.RO)

arXiv:2609.38105 [cs.RO]

(or arXiv:2609.38105v1 [cs.RO] for this version)

https://doi.org/10.48550/arXiv.2609.38105 Focus to learn more arXiv-issued DOI via DataCite (pending registration)

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.

Full text under the publisher's open licence · 336 words

Related coverage