Electrothermal behavior of superconducting nanowires buried in a commercial CMOS process

Authors:Mohamed Gharib, Leonid Popryho, Salma Abdelzaher, Tejas Guruswamy, Tomas Polakovic, Umeshkumar Patel, Orlando Quaranta, Thomas Cecil, Clarence Chang, Yu-Sheng Chen, Thomas H. Swift, Grayson M. Noah, Alberto Gomez-Saiz, John J. L. Morton, M. Fernando Gonzalez-Zalba, Antonino Miceli, Inna Partin-Vaisband

Abstract:Superconducting films native to a commercial CMOS process enable co-integration of superconducting devices (high-kinetic-inductance elements and nanowire detectors) with cryogenic CMOS on one monolithic die. Such films are buried in the front-end-of-line, beneath the back-end-of-line metal stack, an environment that might quench a self-heated hot spot. Current-voltage characteristics are reported for titanium nitride (TiN) nanowires in the polycrystalline-silicon resistor layer of a 22 nm FD-SOI process, and measured retrapping currents are compared with thermal models for longitudinal conduction to the contacts and interfacial phonon cooling into the stack. The wires are strongly hysteretic, with switching-to-retrapping current ratios I_sw/I_r of 7.4-9.8, sustaining a normal hot spot. For two wires of length ell = 50 micrometers and widths W = 0.50 and 1.00 micrometers, over bath temperatures T_b = 0.15-1.19 K, I_r follows the interfacial form (T_hs^n - T_b^n)^(1/2) with n = 4 (T_hs, the effective hot-spot temperature), and is strongly inconsistent with the (T_hs - T_b)^(1/2) constant-kappa longitudinal-conduction limit; free-exponent fits give n = approximately 4.8-5.0. An effective cooling coefficient Sigma_K = 7.9(3) W/(m^2 K^4) describes the data: 31(21) times below the acoustic- (diffuse-) mismatch value for a single clean interface, and approximately 12 times below the lowest previously reported comparable nanowire coefficient. The model-based film thermal conductivity is kappa = approximately 20 mW/(m K). Across lengths ell = 1-50 micrometers, I_r matches neither ell^(-1) of pure longitudinal conduction nor ell^0 of pure interfacial cooling; a two-channel model reproduces I_r(ell) with crossover length ell* = approximately 3.5 micrometers predicted, to an O(1) prefactor, from Sigma_K and kappa.

Instrumentation and Detectors (physics.ins-det); Quantum Physics (quant-ph)

arXiv:2609.35624 [physics.ins-det]

(or arXiv:2609.35624v1 [physics.ins-det] for this version)

https://doi.org/10.48550/arXiv.2609.35624 arXiv-issued DOI via DataCite (pending registration)