aiqbench analysis
This research advances reinforcement learning for humanoid robotics by enabling a Unitree G1 robot to recover from falls on deformable surfaces using human demonstrations as references. The study demonstrates that explicit recovery rewards are critical for adapting policies to soft-ground compliance, where delayed force generation differs significantly from hard-surface interactions. By successfully simulating up to 40 mm of surface penetration while maintaining posture objectives, this work pushes the boundaries of robust locomotion in unstructured environments.
Demonstration-Guided Humanoid Stand-Up on an Emulated Deformable Surface
arXiv:2608.20852v1 Announce Type: new Abstract: This paper presents a reference-guided reinforcement learning framework to generate stand-up motion for a 29-DOF Unitree G1 humanoid on deformable soft ground, using a human demonstration recorded on hard ground. The terrain compliance is modelled using solref and solimp parameters from MuJoCo's rigid body soft-contact model. The rewards consists of (i) reference motion tracking through residual joint-position control and (ii) explicit recovery objectives such as pelvis height, torso uprightness, and the final posture. First, the policy is trained with the specified rewards considering hard ground. Next, the terrain stiffness is lowered by updating solref and the nominal surface penetration zone is expanded using solimp. Subsequent training enables the policy to adapt to the delayed support force generation due to significant surface penetration during contact-intensive phases while preserving the original demonstration pattern. The learned policy successfully completes the fallen-to-standing task in simulation, reaching the targeted pelvis height and uprightness, with a maximum contact penetration of approximately 40 mm during the process. The proposed method is demonstrated on two stand-up sequences and successfully achieves the final recovery objective on both hard and soft ground. Ablation studies show that reference tracking alone is insufficient for successful stand-up, and that explicit recovery rewards are essential.
Abstract:This paper presents a reference-guided reinforcement learning framework to generate stand-up motion for a 29-DOF Unitree G1 humanoid on deformable soft ground, using a human demonstration recorded on hard ground. The terrain compliance is modelled using solref and solimp parameters from MuJoCo's rigid body soft-contact model. The rewards consists of (i) reference motion tracking through residual joint-position control and (ii) explicit recovery objectives such as pelvis height, torso uprightness, and the final posture. First, the policy is trained with the specified rewards considering hard ground. Next, the terrain stiffness is lowered by updating solref and the nominal surface penetration zone is expanded using solimp. Subsequent training enables the policy to adapt to the delayed support force generation due to significant surface penetration during contact-intensive phases while preserving the original demonstration pattern. The learned policy successfully completes the fallen-to-standing task in simulation, reaching the targeted pelvis height and uprightness, with a maximum contact penetration of approximately 40 mm during the process. The proposed method is demonstrated on two stand-up sequences and successfully achieves the final recovery objective on both hard and soft ground. Ablation studies show that reference tracking alone is insufficient for successful stand-up, and that explicit recovery rewards are essential.
Robotics (cs.RO)
arXiv:2608.20852 [cs.RO]
(or arXiv:2608.20852v1 [cs.RO] for this version)
https://doi.org/10.48550/arXiv.2608.20852 Focus to learn more arXiv-issued DOI via DataCite (pending registration)
arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.
Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.
Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.
Full text under the publisher's open licence · 294 words
Related coverage

NVIDIA GTC Taipei at COMPUTEX: Live Updates on What’s Next in AI
NVIDIA · May 21, 2026

Alice & Bob, the French Quantum Computing Company Building FTQC
Quantum Zeitgeist · Jul 17, 2026

Coming of a New Sun
LessWrong · Aug 3, 2026
Running Variational Quantum Eigensolver with Qiskit Aer on AMD Instinct
AMD · May 29, 2026