DART: Dual-Axis Airborne Reachability-Gated Torque-Reaction for Off-Road Vehicle Jumps

Abstract:Traversing crests, ledges, and ditches at high speed often launches vehicles into the air, and a mishandled landing presents a substantial crash hazard. We show that the airborne phase is barely controllable: on a 1383 kg platform the wheel angular-momentum budget caps the recoverable pitch-rate change at roughly $9$-$13^\circ$/s in the tighter nose-up direction under drive at typical takeoff wheel speeds, and at about twice that in the reverse-inclusive braking direction; driving the wheels to their drivetrain hard limit raises the measured nose-up ceiling to only $16$-$18^\circ$/s. Takeoff pitch-rate disturbances beyond this directional budget are physically unrecoverable in flight, so the decisive leverage lies before takeoff. DART (Dual-Axis Airborne Reachability-Gated Torque-Reaction) back-propagates the landing constraint into a closed-form certified feasible-takeoff set, which supplies a conservative go/no-go condition and a pre-takeoff speed-shaping law. In flight, DART regulates pitch and roll via steer-resolved wheel-reaction torque, governed by a per-flight roll latch derived from the yaw-coupling analysis. In deterministic full-scale simulation in this http URL, a calibrated pre-takeoff speed regulator reduces touchdown speed by 36% and raises on-target landings from 0/30 to 30/30. Under the same steep-lip approach the airborne law completes 29/30 safe landings under crash-avoidance bounds versus 0/30 for reaction-wheel-style PD (RW-PD) and time-optimal bang-bang (TOBB). On banked run-ups DART holds the median pitch error at or below $2^\circ$ at every cross-slope, with the largest baseline separation at $\gamma=12^\circ$. Across disturbance regimes, the latch preserves pitch-only allocation on low-disturbance entries and enables dual-axis control when roll becomes binding. All results are from simulation; hardware validation remains open.

Robotics (cs.RO)

arXiv:2607.29011 [cs.RO]

(or arXiv:2607.29011v1 [cs.RO] for this version)

https://doi.org/10.48550/arXiv.2607.29011 Focus to learn more arXiv-issued DOI via DataCite (pending registration)

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.