Continuously Stable Structure through Plastic Deformation

Authors:Junlong Xiao (1), Yaoqiang Pan (1), Xuan Zhang (1), Michael Yu Wang (2), Chao Chen (1) ((1) Faculty of Engineering, Monash University, Clayton, VIC 3800, Australia, (2) Michael Yu Wang. School of Engineering, Great Bay University, Songshan Lake, Dongguan, Guangdong, China)

Abstract:Soft robots have seen widespread adoption in interactive tasks due to their inherent compliance and adaptability. However, these advantages often come at the cost of stability, posing challenges in a dynamic environment. This limitation is especially critical in soft grippers, where instability under acceleration or external disturbances can result in grasp failure. In this study, we present a continuously stable structure through plastic deformation (CSSPD), integrated into a soft gripper. By leveraging the mechanism of plastic deformation, the gripper maintains continuous configurations without energy input, while the added stiffness ensures both static and dynamic stability. We introduce a bioinspired paw pad that significantly enhances stability and enables sensing-based rapid object grasping. Then we develop the mathematical model and optimize the kirigami structure of the metal layer. Experimental results show that the gripper can sustain a passive holding force of up to 16 N without energy input, achieving performance comparable to pneumatic actuation at 0.3 MPa. When combined with pneumatic actuation, it remains stable under pulsed accelerations of up to 400 m/s^2. It can also passively perch on tree branches for extended periods without power, demonstrating promise for mobile robotic applications.

Robotics (cs.RO)

arXiv:2607.15659 [cs.RO]

(or arXiv:2607.15659v1 [cs.RO] for this version)

https://doi.org/10.48550/arXiv.2607.15659 arXiv-issued DOI via DataCite (pending registration)