aiqbench analysis
BiPneu introduces a scalable bipolar-pressure pneumatic system that addresses the inherent asymmetry in soft robot actuation through a novel dual-mode sliding-mode controller. Experimental validation demonstrates significant improvements in tracking accuracy and transient response over standard PID and model predictive control methods, offering a practical solution for high-performance soft robotics. This advancement enables more versatile actuation modes and seamless integration with existing software ecosystems, bridging the gap between theoretical control models and real-world soft robotic applications.
BiPneu: Design and Control of a Bipolar-Pressure Pneumatic System for Soft Robots
arXiv:2605.12804v3 Announce Type: replace Abstract: Positive-negative pressure regulation is critical to soft robotic actuators, enabling large motion ranges and versatile actuation modes. However, achieving high-performance regulation across both pressure polarities remains challenging due to asymmetric inflation-deflation dynamics, valve nonlinearities, and switching-induced flow disturbances. This paper presents BiPneu, a scalable and cost-efficient multi-channel bipolar-pressure pneumatic system for soft robots that enables wide-range, accurate, and responsive pressure regulation while providing seamless compatibility with high-level software ecosystems. A dual-mode sliding-mode controller (DM-SMC) with hysteresis-supervised mode selection is proposed based on a hybrid electro-pneumatic model. Extensive simulation and experiments demonstrate the superior performance of DM-SMC in tracking step and sinusoidal pressure references compared with both advanced model predictive controllers and well-tuned PID controllers. Experimental results show average absolute errors of 1.44 kPa in multi-step tests and 4.23 kPa in sinusoidal tracking, corresponding to reductions of 11.9% and 35.6% relative to PID control, along with improved control effort, valve switching rate, and transient response. Robustness of DM-SMC is further verified on a bellow actuator with pressure-dependent volume. Finally, BiPneu's capability is demonstrated via two soft robotic examples, quick ball-maneuvering with a soft parallel manipulator and real-time finite element method (FEM)-based teleoperation of a soft bellows actuator.
Abstract:Positive-negative pressure regulation is critical to soft robotic actuators, enabling large motion ranges and versatile actuation modes. However, achieving high-performance regulation across both pressure polarities remains challenging due to asymmetric inflation-deflation dynamics, valve nonlinearities, and switching-induced flow disturbances. This paper presents BiPneu, a scalable and cost-efficient multi-channel bipolar-pressure pneumatic system for soft robots that enables wide-range, accurate, and responsive pressure regulation while providing seamless compatibility with high-level software ecosystems. A dual-mode sliding-mode controller (DM-SMC) with hysteresis-supervised mode selection is proposed based on a hybrid electro-pneumatic model. Extensive simulation and experiments demonstrate the superior performance of DM-SMC in tracking step and sinusoidal pressure references compared with both advanced model predictive controllers and well-tuned PID controllers. Experimental results show average absolute errors of 1.44 kPa in multi-step tests and 4.23 kPa in sinusoidal tracking, corresponding to reductions of 11.9% and 35.6% relative to PID control, along with improved control effort, valve switching rate, and transient response. Robustness of DM-SMC is further verified on a bellow actuator with pressure-dependent volume. Finally, BiPneu's capability is demonstrated via two soft robotic examples, quick ball-maneuvering with a soft parallel manipulator and real-time finite element method (FEM)-based teleoperation of a soft bellows actuator.
Robotics (cs.RO)
arXiv:2605.12804 [cs.RO]
(or arXiv:2605.12804v3 [cs.RO] for this version)
https://doi.org/10.1109/TMECH.2026.3693622 DOI(s) linking to related resources
Full text under the publisher's open licence · 212 words
Related coverage
BiPneu: Design and Control of a Bipolar-Pressure Pneumatic System for Soft Robots
arXiv · Jun 4, 2026
Make a Soft Digital Clock Tick With Millifluidics
IEEE Spectrum · May 29, 2026
Towards Effective Physical Reservoir Computing with a Pneumatic Soft Robot
arXiv · Sep 3, 2026
TO-SoFiT: Topology Optimization of Hydraulic Soft Fish Tail Design for programmable undulating locomotion
arXiv · Jun 16, 2026