matlab-set-up-usrp-radio
De la autor
Set up and verify a connection to an NI USRP radio (USRP E320, N300, N310, N320, N321, X300, X310, or X410) using Wireless Testbench. Use when connecting a USRP for the first time, configuring radio hardware, troubleshooting connection failures, or verifying a radio setup. Covers host inspection (OS, NIC type/speed/MTU), device discovery (findsdru, probesdru), UHD version checking, programmatic radio configuration, and basebandTransceiver verification. Also use when the user mentions USRP setup, radio not found, connection errors, dropped samples, or network configuration for SDR hardware.
Instalare
npx skills add matlab/matlab-agentic-toolkit --skill matlab-set-up-usrp-radio -a claude-code
Se instalează în .claude/skills/matlab-set-up-usrp-radio/ · Fiecare comandă descarcă skill-ul direct de pe GitHub cu utilitarul open source skills.
Fără descărcare: licența acestui skill (Personalizată sau neclară) nu ne permite să-i redistribuim fișierele. Comenzile de instalare le iau direct de pe GitHub.
Vrei ca agentul să-ți propună skill-uri în timp ce scrii? Vezi cum folosești skill-urile din IDE.
Verificări de siguranță pe SKILL.md
- Folosește sudoScăzut
De ce 80
aiqbench calculează scorul de încredere din semnale publice. Nu este un audit de securitate, așa că citește un skill înainte să-l instalezi.
Skill-uri similare
Cele mai apropiate de acesta prin ce fac și când sunt folosite.
- matlab-transmit-capture-usrpmatlab/matlab-agentic-toolkitTransmit and capture RF waveforms using Wireless Testbench with NI USRP radios (X410, X310, N310, N320, N321, N300, X300, E320). Use when generating test signals, transmitting over the air, capturing IQ data, performing loopback tests, configuring multi-antenna setups, or troubleshooting dropped samples and gain settings. Covers basebandTransceiver, basebandTransmitter, basebandReceiver, continuous and once transmit modes, foreground and background capture, and UseRadioBuffer options. Also use when the user mentions transmit waveform, capture signal, IQ data, loopback, RF gain, sample rate, or antenna configuration.Testare★ 1.2K
- matlab-detect-capture-usrpmatlab/matlab-agentic-toolkitSmart triggered RF capture on NI USRP radios with Wireless Testbench — record only when a signal of interest appears, not continuously (triggered spectrum sensing). Use energy detection to capture when signal power rises above the noise floor, or preamble detection to cross-correlate against a known sequence (WLAN L-LTF, 5G NR PSS/SSS, LTE PSS, Zadoff-Chu, custom protocols) and capture only when that protocol's preamble is detected. Use when implementing triggered (wake-on-signal) capture or spectrum sensing, capturing protocol-based signals via cross-correlation, calibrating detection thresholds (plotDetectionSignals / plotThreshold), scanning frequency bands for activity, or building transmit-then-detect workflows.Planificare★ 1.2K
- matlab-connect-arduinomatlab/matlab-agentic-toolkitDiscover, configure, and connect to Arduino boards from MATLAB using the Arduino Support Package. Use this skill when the user wants to set up an Arduino board, connect to Arduino hardware, find connected boards, scan serial ports, configure Arduino libraries, or any task that requires an Arduino connection as a prerequisite (e.g., blink LED, read sensor, read digital pin, read analog pin, write pin, plot sensor data, scan I2C, use ultrasonic sensor, control servo, read temperature, read voltage, data logging from hardware). Triggers on: arduino, board setup, COM port, serial port, hardware connection, Arduino Nano, Arduino Uno, Arduino Mega, Arduino Micro, Grove, sensor setup, I2C scan, ultrasonic, servo, readDigitalPin, writeDigitalPin, readVoltage, writePWMVoltage, temperature sensor, air pressure, pin read, pin write, analog input.Redactare★ 1.2K
- matlab-integrate-antennamatlab/matlab-agentic-toolkitIntegrate antennas into RF systems using MATLAB Antenna Toolbox and RF Toolbox. Covers impedance matching network design (L/Pi/Tee topologies, evaluation parameters, Richards transformation), measured antenna creation (E-field, directivity-only, EmbeddedE, ffsReader import), RF propagation and site planning (txsite/rxsite, coverage, SINR, ray tracing, link budget), and SAR estimation (birdcage+Phantom, conformalArray+Custom3D, direct EHfields). Use when the user wants to match an antenna, create a measuredAntenna, compute coverage or signal strength, perform ray tracing, or estimate SAR.Design★ 1.2K
- matlab-generate-wlan-waveformmatlab/matlab-agentic-toolkitGenerate standard-compliant IEEE 802.11 waveforms using MATLAB WLAN Toolbox. Use when creating WLAN waveforms, PPDU packets, or the transmit side of a link-level simulation. Covers all formats: Non-HT (802.11a/g), HT (802.11n), VHT (802.11ac), HE-SU/HE-MU/HE-TB (802.11ax), EHT-MU/EHT-TB (802.11be), UHR-MU/UHR-TB/UHR-ELR (802.11bn). Handles single-user, MU-MIMO, OFDMA, trigger-based uplink, extended range, preamble puncturing, UEQM, and DRU. Use when asked to generate test waveforms, create packets with MAC frames, configure OFDMA resource units, build trigger-based uplink transmissions, target a specific transmit duration, or build multi-packet waveforms.Testare★ 1.2K
- matlab-discover-hardwarematlab/matlab-agentic-toolkitDiscovers connected MATLAB-supported hardware devices, searches by capability, and checks required support packages and add-ons. Use when the user asks what hardware is connected, finds a device that supports a capability (e.g., CAN, analog input), or checks if required support packages or add-ons are installed. Does NOT connect to, configure, or acquire data from devices — defers to device-specific skills for usage workflows.Planificare★ 1.2K
Note și recenzii
—
nicio recenzie
Ai încercat acest skill? Notează-l ca să-i ajuți pe alții. Autentifică-te
Discuție
Intră în discuție. Autentifică-te