De la autor
Use when building a Zephyr app with west, picking a board target, editing prj.conf or a devicetree overlay, adding logging, running on native_sim, or using west debug. Not for FreeRTOS: use freertos.
Instalare
npx skills add OutlineDriven/outline-driven-development --skill zephyr -a claude-code
Se instalează în .claude/skills/zephyr/ · Fiecare comandă descarcă skill-ul direct de pe GitHub cu utilitarul open source skills.
Identic octet cu octet cu commit-ul scanat, cu licența depozitului și un fișier SOURCE.txt.
Vrei ca agentul să-ți propună skill-uri în timp ce scrii? Vezi cum folosești skill-urile din IDE.
Verificări de siguranță pe SKILL.md
Niciun avertisment.
De ce 82
aiqbench calculează scorul de încredere din semnale publice. Nu este un audit de securitate, așa că citește un skill înainte să-l instalezi.
Skill-uri similare
Cele mai apropiate de acesta prin ce fac și când sunt folosite.
- freertosOutlineDriven/outline-driven-developmentUse when creating FreeRTOS tasks, queues, semaphores, or mutexes, catching stack overflow, writing FreeRTOSConfig.h, or debugging tasks over OpenOCD and GDB. Not for probe setup: use openocd-jtag.Redactare★ 54
- embedded-systemsJeffallan/claude-skillsUse when developing firmware for microcontrollers, implementing RTOS applications, or optimizing power consumption. Invoke for STM32, ESP32, FreeRTOS, bare-metal, power optimization, real-time systems, configure peripherals, write interrupt handlers, implement DMA transfers, debug timing issues.Redactare★ 12.1K
- zephyr-agent-skillsberiberikix/zephyr-agent-skillsZephyr RTOS development — boards and devicetree, the build system (west, Kconfig, CMake, sysbuild), drivers and peripherals, BLE and networking, the kernel, storage, power, testing and debugging, security and OTA. Use this for ANY Zephyr RTOS or embedded-firmware task on a Zephyr project; it routes you to the right specialized skill via the zephyr-cli registry.Securitate★ 72
- esp32-developmentmagnus919/agent-skillsBuild, configure, flash, test, debug, and recover firmware for ESP32-family boards, including ESP-IDF C/C++, Arduino/PlatformIO, MicroPython, CircuitPython, ESPHome, Zephyr, Rust, and NuttX. Use when identifying an ESP32 board, choosing a framework, wiring GPIO or peripheral buses, integrating sensors or actuators, diagnosing serial/boot/power/network failures, planning OTA and production security, or automating hardware tests and fault injection. Do not use as a substitute for the exact board schematic, SoC datasheet, or attached component datasheet.Securitate★ 148
- linker-scriptsOutlineDriven/outline-driven-developmentUse when writing a GNU ld script for a bare-metal target, placing code in a flash or RAM region, wiring .data and .bss startup, or fixing a region overflowed error. Not for LTO: use linkers-lto.Redactare★ 54
- embedded-iottravisjneuman/.claudeEmbedded systems firmware, microcontrollers (ESP32, STM32, Arduino, Raspberry Pi), RTOS (FreeRTOS, Zephyr), IoT protocols (MQTT, CoAP, BLE), bare-metal C/C++, and hardware peripheral interfaces (I2C, SPI, UART, GPIO). Use when developing firmware, working with microcontrollers, or building IoT devices.Altele★ 106
Note și recenzii
—
nicio recenzie
Ai încercat acest skill? Notează-l ca să-i ajuți pe alții. Autentifică-te
Discuție
Intră în discuție. Autentifică-te