tipping-over-a-surface-edge
De la autor
Turn a body over on the surface it rests on instead of carrying it — pinch two opposite walls LOOSELY and off centre so the pads act as a pin joint, lift so the surface and gravity stand the body up on its own edge, then press it onto the surface and pull the pins toward you about whichever edge is grounded until it is just past balance, and let go. Use when a rigid grasp cannot transmit the torque a full roll needs (a parallel jaw rolling about its own closing axis), when the body is too big to turn over in hand, or when the arm's envelope cannot follow a held body through the roll.
Instalare
npx skills add graph-robots/open-robot-skills --skill tipping-over-a-surface-edge -a claude-code
Se instalează în .claude/skills/tipping-over-a-surface-edge/ · Fiecare comandă descarcă skill-ul direct de pe GitHub cu utilitarul open source skills.
Identic octet cu octet cu commit-ul scanat, cu licența depozitului și un fișier SOURCE.txt.
Vrei ca agentul să-ți propună skill-uri în timp ce scrii? Vezi cum folosești skill-urile din IDE.
Verificări de siguranță pe SKILL.md
- Include scripturi pe care nu le-am verificatScăzut
De ce 76
aiqbench calculează scorul de încredere din semnale publice. Nu este un audit de securitate, așa că citește un skill înainte să-l instalezi.
Skill-uri similare
Cele mai apropiate de acesta prin ce fac și când sunt folosite.
- grasping-concave-contourgraph-robots/open-robot-skillsGrasp an awkward rigid part by the waists in its own silhouette — take the alpha shape of its point cloud from above, find where that boundary turns inward, and close the jaws across a pair of those inward runs. Use when a part has no graspable long axis and no pair of parallel walls an OBB would find — pliers and scissors gripped at the joint, a spool at its neck, a gear between two teeth, a bulb socket at its skirt. Use grasping-linear-feature instead for handles, rods and shafts, and grasping-short-axis when an upright box is enough.Altele★ 58
- proposing-side-graspsgraph-robots/open-robot-skillsPropose horizontal (side-entry) grasps swept around an object's oriented box — twelve azimuths ranked by jaw margin. Use when top-down access is blocked by an overhead shelf, a lid or a bin wall, or when the object's vertical dimension is the only one the hand can span. Declines when the object is wider than the jaws from every azimuth.Altele★ 58
- anchoring-a-free-endgraph-robots/open-robot-skillsPins one end of a cable with the support hand before any crossing is attempted — asks the support-hand planner for the anchor grasp as joint-space legs, refuses it when its worst IK error is past the limit, streams the legs, closes the jaws to the plan's own width and dwells for the fingers' travel, and carries the solved chain and grasp orientation out on the exit so later pay-outs seed from them. Use when a deformable linear object must be held at one end so a sideways pull bends it instead of dragging the whole thing.Planificare★ 58
- proposing-short-axis-graspsgraph-robots/open-robot-skillsPropose top-down grasps whose jaws close ACROSS an elongated object's short axis, derived from its oriented box. Use when the object is longer than it is wide, as the first grasp-proposal rung — a handle, a spanner, a screwdriver, a bar, a laid-down bottle — where closing along the length would put the fingers down the object and meet them on each other. Declines when the short axis is wider than the hand opens, which is the signal to try `proposing-side-grasps` rather than to re-tune this one.Altele★ 58
- placing-held-featuregraph-robots/open-robot-skillsMove a held object so one of its declared features lands on a target point — a ring onto a hook, a tip into a hole, a plug at a bore. Composes the hand pose from the live object pose and the feature's centre in the object's own frame, recomputed each round so in-jaw slip cannot compound. Use for any goal written as "this object's feature at that place"; do NOT drive the hand to the target directly, which is wrong by the length of the held object.Redactare★ 58
- grasping-linear-featuregraph-robots/open-robot-skillsFit the full 3D axis of an elongated segmented feature and grasp it with a perpendicular, inclination-aware parallel-jaw pose. Use for handles, rods, shafts, tools, utensils, and other linear parts whose pitch or roll matters; use grasping-short-axis instead when an upright OBB and vertical approach are sufficient.Altele★ 58
Note și recenzii
—
nicio recenzie
Ai încercat acest skill? Notează-l ca să-i ajuți pe alții. Autentifică-te
Discuție
Intră în discuție. Autentifică-te