matlab-design-ofdm-system
De la autor
Read BEFORE writing any code that builds or simulates OFDM systems. The default MATLAB patterns for OFDM (e.g., direct ifft/fft, awgn with 0 dBW power, missing symOffset) produce subtly incorrect results — always use ofdmmod/ofdmdemod instead of direct IFFT/FFT. This skill specifies the correct calling conventions for ofdmmod, ofdmdemod, ofdmChannelResponse, ofdmEqualize, and critical anti-patterns that must be avoided. Use when building OFDM transmitters or receivers, allocating subcarriers and guard bands, inserting pilots, computing SNR for OFDM, configuring fading channels (Rayleigh/Rician), estimating and equalizing channels, implementing timing and frequency synchronization, adding LDPC coding, designing resource grids, or setting up OFDM link simulations.
Instalare
npx skills add matlab/matlab-agentic-toolkit --skill matlab-design-ofdm-system -a claude-code
Se instalează în .claude/skills/matlab-design-ofdm-system/ · Fiecare comandă descarcă skill-ul direct de pe GitHub cu utilitarul open source skills.
Fără descărcare: licența acestui skill (Personalizată sau neclară) nu ne permite să-i redistribuim fișierele. Comenzile de instalare le iau direct de pe GitHub.
Vrei ca agentul să-ți propună skill-uri în timp ce scrii? Vezi cum folosești skill-urile din IDE.
Verificări de siguranță pe SKILL.md
Niciun avertisment.
De ce 82
aiqbench calculează scorul de încredere din semnale publice. Nu este un audit de securitate, așa că citește un skill înainte să-l instalezi.
Skill-uri similare
Cele mai apropiate de acesta prin ce fac și când sunt folosite.
- matlab-add-awgnmatlab/matlab-agentic-toolkitRead BEFORE writing any code that adds Additive White Gaussian Noise (AWGN) to signals and converts between SNR, Eb/No, Es/No, and per-subcarrier SNR for communications simulations, using awgn(), convertSNR(), berawgn(). The default MATLAB patterns for AWGN (e.g., 'measured' option, manual SNR formulas) produce subtly incorrect results. This skill specifies the correct calling conventions, required function usage, and critical anti-patterns that must be avoided.Redactare★ 1.2K
- matlab-design-dsphdl-ddcmatlab/matlab-agentic-toolkitUse when designing a Digital Down Converter (DDC) using dsphdl System objects. Triggers on requests involving DDC design, frequency down-conversion for FPGA/ASIC, NCO + mixer + decimation filter chains, fractional/non-integer sample rate conversion, or HDL-optimized receiver front-end signal processing.Design★ 1.2K
- matlab-design-radar-waveformmatlab/matlab-agentic-toolkitDesign, select, and analyze waveforms for radar, sonar, and active sensing using the Phased Array System Toolbox. Covers LFM, NLFM, FMCW, phase-coded, CW, stepped FM, custom IQ, ambiguity functions, sidelobe reduction, and Doppler tolerance. Key objects: phased.LinearFMWaveform, phased.NonlinearFMWaveform, phased.CustomFMWaveform, phased.PhaseCodedWaveform, phased.FMCWWaveform, phased.SteppedFMWaveform, phased.MFSKWaveform, phased.RectangularWaveform, nlfmspec2freq, shapespectrum, ambgfun, pambgfun, sidelobelevel, legendreseq, mlseq, radarWaveformGenerator.Design★ 1.2K
- matlab-generate-wlan-waveformmatlab/matlab-agentic-toolkitGenerate standard-compliant IEEE 802.11 waveforms using MATLAB WLAN Toolbox. Use when creating WLAN waveforms, PPDU packets, or the transmit side of a link-level simulation. Covers all formats: Non-HT (802.11a/g), HT (802.11n), VHT (802.11ac), HE-SU/HE-MU/HE-TB (802.11ax), EHT-MU/EHT-TB (802.11be), UHR-MU/UHR-TB/UHR-ELR (802.11bn). Handles single-user, MU-MIMO, OFDMA, trigger-based uplink, extended range, preamble puncturing, UEQM, and DRU. Use when asked to generate test waveforms, create packets with MAC frames, configure OFDMA resource units, build trigger-based uplink transmissions, target a specific transmit duration, or build multi-packet waveforms.Testare★ 1.2K
- matlab-design-pcb-filtermatlab/matlab-agentic-toolkitBandpass, lowpass, bandstop filter design — hairpin, coupled-line, combline, stub, SIW for frequency selection and harmonic rejection. TRIGGER: user asks to design, create, or analyze any RF filter (bandpass, lowpass, highpass, bandstop, hairpin, coupled-line, combline, stub, SIW). Invoke BEFORE writing code — filter class names differ from what you would guess. SKIP: EM simulation/S-parameter extraction of an existing filter (use matlab-analyze-em), general PCB layout assembly (use matlab-assemble-pcb-layout), material/stackup setup only (use matlab-manage-pcb-material), optimization sweeps (use matlab-optimize-pcb-design).Design★ 1.2K
- matlab-model-viamatlab/matlab-agentic-toolkitVia modeling: pads, antipads, ground return vias, GRV placement, and signal integrity for high-speed layer transitions. TRIGGER: user asks to model a via, design a via transition, place ground return vias, analyze via performance, or check signal integrity through layer transitions. Invoke BEFORE writing code — only viaSingleEnded exists (no viaDifferential), and the location format is non-obvious. SKIP: general signal integrity without vias (use matlab-analyze-em), transmission line design (use matlab-design-pcb-transmission-line), PDN analysis (use matlab-analyze-pcb-pdn), material/stackup setup only (use matlab-manage-pcb-material).Design★ 1.2K
Note și recenzii
—
nicio recenzie
Ai încercat acest skill? Notează-l ca să-i ajuți pe alții. Autentifică-te
Discuție
Intră în discuție. Autentifică-te