matlab-deploy-embedded-code
De la autor
Deploy MATLAB-generated code to embedded hardware using Embedded Coder. Use when configuring code generation for microcontrollers (STM32, Raspberry Pi, ARM Cortex), setting up PIL/SIL verification, disabling dynamic memory allocation, or configuring hardware-specific code generation settings. Covers ERT-based configurations, processor-in-the-loop testing, memory constraints, and the MEX→SIL→PIL verification progression.
Instalare
npx skills add matlab/matlab-agentic-toolkit --skill matlab-deploy-embedded-code -a claude-code
Se instalează în .claude/skills/matlab-deploy-embedded-code/ · Fiecare comandă descarcă skill-ul direct de pe GitHub cu utilitarul open source skills.
Fără descărcare: licența acestui skill (Personalizată sau neclară) nu ne permite să-i redistribuim fișierele. Comenzile de instalare le iau direct de pe GitHub.
Vrei ca agentul să-ți propună skill-uri în timp ce scrii? Vezi cum folosești skill-urile din IDE.
Verificări de siguranță pe SKILL.md
Niciun avertisment.
De ce 82
Securitate100
Proveniență77
Întreținere100
Licență45
Adopție50
aiqbench calculează scorul de încredere din semnale publice. Nu este un audit de securitate, așa că citește un skill înainte să-l instalezi.
Skill-uri similare
Cele mai apropiate de acesta prin ce fac și când sunt folosite.
- matlab-deploy-embedded-aimatlab/matlab-agentic-toolkitDeploy AI models to embedded hardware using MathWorks tools (MATLAB, Simulink, Embedded Coder). Covers two workflow patterns: (1) MathWorks-native or imported models rebuilt as dlnetwork for lean hardware, (2) direct C/C++ code generation from PyTorch and LiteRT models. Both patterns support all targets (Cortex-M/A/R, x86, GPU). Trigger when: user wants to deploy AI to embedded targets; generate C/CUDA from neural networks; compress AI models for MCU; integrate AI in Simulink for system-level simulation; import PyTorch/ONNX/TensorFlow models for embedded deployment; optimize AI for resource-constrained hardware; or use loadPyTorchExportedProgram, loadLiteRTModel, importNetworkFromPyTorch, importNetworkFromONNX, importNetworkFromTensorFlow, importNetworkFromKeras, dlquantizer, exportNetworkToSimulink, or Embedded Coder with AI models.DevOps★ 1.2K
- matlab-generate-codematlab/matlab-agentic-toolkitGenerate, verify, refine, and accelerate C/C++ or CUDA code from MATLAB with MATLAB Coder, Embedded Coder, GPU Coder, or MATLAB Test. Also covers writing codegen-ready MATLAB code: language constraints, coder.* directives, and optimization patterns. Triggers on: codegen, MEX, deploy MATLAB as C/C++, GPU Coder, coder.screener, coder.config, coder.gpuConfig, coder.typeof, coder.runTest, matlabtest.coder.TestCase, SIL, embedded config, no dynamic memory, EnableMexProfiling, coder.timeit, coder.perfCompare, %#codegen, writing codegen-ready MATLAB, code generation readiness, coder.varsize, coder.unroll, coder.noImplicitExpansionInFunction, coder.ceval, coder.inline, coder.extrinsic, coder.const, coder.classSignature, class codegen limitations, temporal types codegen, DMA-off, stack-only, host-target InstructionSetExtensions, SIMDAcceleration, OptimizeReductions, host SIMD tuning, host OpenMP, codegen performance.Inginerie★ 1.2K
- matlab-deploy-ai-modelmatlab/matlab-agentic-toolkitGenerate C/C++ or CUDA code from an AI model (PyTorch, LiteRT) using MATLAB Coder or GPU Coder. Use when the user wants to integrate an AI model into an application with code generation as the end goal — generating MEX, CUDA MEX, static library, dynamic library, or executable — or using the model in Simulink for simulation and code generation. Covers PyTorch ExportedProgram (.pt2) via loadPyTorchExportedProgram and LiteRT (.tflite) via loadLiteRTModel (R2026a+). Keywords: PyTorch, torch, .pt2, ExportedProgram, loadPyTorchExportedProgram, invoke, codegen, MEX, CUDA, GPU, C, C++, deploy, AI model, deep learning model, LiteRT, TFLite, TensorFlow Lite, Simulink, slbuild, PyTorch ExportedProgram block, MATLAB Function block, dlosslib, loadLiteRTModel.DevOps★ 1.2K
- matlab-connect-arduinomatlab/matlab-agentic-toolkitDiscover, configure, and connect to Arduino boards from MATLAB using the Arduino Support Package. Use this skill when the user wants to set up an Arduino board, connect to Arduino hardware, find connected boards, scan serial ports, configure Arduino libraries, or any task that requires an Arduino connection as a prerequisite (e.g., blink LED, read sensor, read digital pin, read analog pin, write pin, plot sensor data, scan I2C, use ultrasonic sensor, control servo, read temperature, read voltage, data logging from hardware). Triggers on: arduino, board setup, COM port, serial port, hardware connection, Arduino Nano, Arduino Uno, Arduino Mega, Arduino Micro, Grove, sensor setup, I2C scan, ultrasonic, servo, readDigitalPin, writeDigitalPin, readVoltage, writePWMVoltage, temperature sensor, air pressure, pin read, pin write, analog input.Redactare★ 1.2K
- simulink-configure-model-for-code-generationmatlab/simulink-agentic-toolkitConfigure Simulink models for Embedded Coder (ERT), Simulink Coder (GRT rapid-prototyping), or AUTOSAR code generation. Use when the user asks to generate embedded C or C++ code, run a full build of a model, produce a code generation report, configure a model for production/ECU deployment or rapid-prototyping code, target ARM or x86 hardware, apply MISRA C/C++ compliance (ERT/AUTOSAR only — Simulink Coder does not ship MISRA profiles), or set up GRT, ERT, AUTOSAR, or shared-library targets. Handles target selection, hardware mapping, model hierarchy propagation, and constraint introspection via the configure_for_codegen function. Do NOT use for GRT shared-library variants (grt_malloc.tlc), DDS, or ROS, or for iterative optimization workflows that measure baseline metrics, apply targeted changes, and re-measure to confirm improvement.Inginerie★ 1.3K
- embedded-systemsJeffallan/claude-skillsUse when developing firmware for microcontrollers, implementing RTOS applications, or optimizing power consumption. Invoke for STM32, ESP32, FreeRTOS, bare-metal, power optimization, real-time systems, configure peripherals, write interrupt handlers, implement DMA transfers, debug timing issues.Redactare★ 12K
Note și recenzii
—
nicio recenzie
Ai încercat acest skill? Notează-l ca să-i ajuți pe alții. Autentifică-te
Discuție
Intră în discuție. Autentifică-te