simulink-instrument-real-time-application
De la autor
Set up signal capture for a Simulink Real-Time application using `slrealtime.Instrument`. Use when choosing which signals a real-time application captures and where the data goes — test-pointing or canvas-badging a signal before build (`TestPoint`, `DataLogging`), constructing an Instrument from an `.mldatx`, calling `addSignal`, `addInstrumentedSignals`, `addFileLogSignals`, `validate`, `connectCallback`, `copy`, or `generateScript`, attaching an instrument to `tg.Instruments` via `addForFileLog`, `addForSDI`, or `addForMATLAB`, setting up live-streaming signals, dynamic file-log workflows, or persisting an instrument as M-code. Selects and routes signals only — not for configuring, building, running, or connecting applications onto targets.
Instalare
npx skills add matlab/simulink-agentic-toolkit --skill simulink-instrument-real-time-application -a claude-code
Se instalează în .claude/skills/simulink-instrument-real-time-application/ · Fiecare comandă descarcă skill-ul direct de pe GitHub cu utilitarul open source skills.
Fără descărcare: licența acestui skill (Personalizată sau neclară) nu ne permite să-i redistribuim fișierele. Comenzile de instalare le iau direct de pe GitHub.
Vrei ca agentul să-ți propună skill-uri în timp ce scrii? Vezi cum folosești skill-urile din IDE.
Verificări de siguranță pe SKILL.md
Niciun avertisment.
De ce 82
aiqbench calculează scorul de încredere din semnale publice. Nu este un audit de securitate, așa că citește un skill înainte să-l instalezi.
Skill-uri similare
Cele mai apropiate de acesta prin ce fac și când sunt folosite.
- simulink-run-real-time-applicationmatlab/simulink-agentic-toolkitBuild, deploy, run, monitor, tune, and stop Simulink Real-Time applications. Use when the user wants to build a Simulink Real-Time model, load/start/stop an `.mldatx` on a target, set stop time or start options, drive root inports/playback/parameter stimulation, inspect installed or running apps, tune parameters with `getparam`/`setparam`, read ad hoc signal values with `getsignal`, manage parameter sets, control recording, or choose between file logging, live streaming, and file-log import. Covers `slbuild`, `install`, `load`, `start`, `stop`, `setStopTime`, `tg.Stimulation`, `startRecording`/`stopRecording`, `tg.FileLog.import`, `slrealtime.exportRun`, `getparam`/`setparam`, `getsignal`, and installed app management for Speedgoat targets and Simulink Real-Time Linux devices.DevOps★ 1.3K
- simulink-configure-real-time-modelmatlab/simulink-agentic-toolkitConfigure a Simulink model for Simulink Real-Time code generation and deployment. Use when setting up a model for Simulink Real-Time, selecting the correct system target file, fixing TLC/STF mismatches, applying fixed-step solver settings, validating target-platform compatibility, or configuring Simulink Real-Time build options before model build.DevOps★ 1.3K
- simulink-streaming-dspmatlab/simulink-agentic-toolkitBuilding or editing Simulink (.slx) models that stream signals in frames using DSP System Toolbox — audio, vibration, radar, comms. Use when the prompt names a Simulink block (Discrete FIR Filter, Buffer, Unbuffer, Rate Transition, Downsample, Upsample, Sample-Rate Converter, FIR Decimation, Time Scope, Spectrum Analyzer, From Multimedia File) or an action (frame-based processing, InputProcessing, buffering, overlap, windowing, STFT, short-time Fourier, decimate, downsample, upsample, resample, multirate, anti-aliasing, tunable filter). Prevents silent numerical errors from sample-vs-frame mismatch, wrong block choice, or missing anti-aliasing.Media★ 1.3K
- simulink-configure-real-time-targetmatlab/simulink-agentic-toolkitManage Simulink Real-Time target computers from MATLAB — list available targets, check whether a target is connected, read its lifecycle status, add/remove/rename targets, set IP addresses and credentials, choose the default target, install TLS material, configure a startup application, and run target lifecycle ops (connect, reboot, RTOS update). Use whenever the user asks "which targets are available", "is my target connected", "what's the status of the target", "add a Speedgoat", "switch default target", "change the target IP", "reboot the box", "update the target", or works with `slrealtime.Targets`, `tg = slrealtime`, `addTarget`, `removeTarget`, `getTargetNames`, `getDefaultTargetName`, `setDefaultTargetName`, `connect`, `isConnected`, `status(tg)`, `setipaddr`, `setupTLSCertificate`, `setStartupApp`, `reboot`, `update`, or `slrealtime.testSetup`. Covers Speedgoat target computers and Simulink Real-Time Linux devices.Altele★ 1.3K
- matlab-process-streaming-audiomatlab/matlab-agentic-toolkitDesign and implement real-time audio processing chains using Audio Toolbox streaming objects. Use when building frame-based audio processing loops, multiband filters, dynamic range control, parametric EQ, level metering, loudness metering, SPL metering, octave-band analysis, sample rate conversion, frequency-domain filtering (long impulse responses, custom filter banks), or audio chains in Simulink. Covers visualization (visualize method), interactive tuning (parameterTuner), MIDI control, and Audio Toolbox Simulink blocks. Use when the user says "real-time audio", "streaming audio", "audio filter", "compressor", "equalizer", "level meter", "loudness meter", "SPL meter", "octave bands", "crossover filter", "audio chain", "MIDI control", "convolution reverb", "impulse response streaming", "frequency-domain filter", or asks to process audio frame-by-frame.Media★ 1.2K
- authoring-simulink-inputsmatlab/simulink-agentic-toolkitSynthesize new waveforms from scratch for Simulink inports using createInputDataset. Use ONLY when the user asks to generate, create, or synthesize signals (step, ramp, sine, chirp, pulse, noise) to populate a Dataset for External Inputs or Signal Editor. Covers timeseries and timetable formats with correct data type, interpolation, units, and dimensions. Also covers function-call and trigger inport timing setup. Do NOT use when the user wants to load, import, or read existing data from files (MAT, CSV, spreadsheet) — even if that data will be used as model input. Do NOT use for running simulations or plotting outputs.Date★ 1.3K
Note și recenzii
—
nicio recenzie
Ai încercat acest skill? Notează-l ca să-i ajuți pe alții. Autentifică-te
Discuție
Intră în discuție. Autentifică-te