inject-faults
De la autor
Add, configure, and manage faults on Simulink, Simscape, and System Composer model signals for robustness analysis and safety validation. Use when injecting faults (stuck, noise, gain, offset) onto block inports/outports, enabling fault simulation, or analyzing fault effects. Covers sensor failures, signal corruptions, actuator faults, FMEA validation, and robustness testing. Requires Simulink Fault Analyzer.
Instalare
npx skills add matlab/simulink-agentic-toolkit --skill inject-faults -a claude-code
Se instalează în .claude/skills/inject-faults/ · Fiecare comandă descarcă skill-ul direct de pe GitHub cu utilitarul open source skills.
Fără descărcare: licența acestui skill (Personalizată sau neclară) nu ne permite să-i redistribuim fișierele. Comenzile de instalare le iau direct de pe GitHub.
Vrei ca agentul să-ți propună skill-uri în timp ce scrii? Vezi cum folosești skill-urile din IDE.
Verificări de siguranță pe SKILL.md
Niciun avertisment.
De ce 82
aiqbench calculează scorul de încredere din semnale publice. Nu este un audit de securitate, așa că citește un skill înainte să-l instalezi.
Skill-uri similare
Cele mai apropiate de acesta prin ce fac și când sunt folosite.
- building-simulink-modelsmatlab/simulink-agentic-toolkitBuilds and edits Simulink, System Composer, Stateflow, and Simscape models. Use when modifying model structure, parameters, ports, connections, or Stateflow chart internals.Redactare★ 1.3K
- simulink-collect-metricsmatlab/simulink-agentic-toolkitCollect and assess quality metrics for Simulink models using the metric.Engine API. Use when evaluating model design quality (maintainability, complexity, architecture) or testing completeness (unit testing, SIL, PIL, coverage, pass rates) after edits or test runs. Covers metric discovery, collection, report generation, and diagnostics. Triggers on: "collect metrics", "quality metrics", "metric.Engine", "testing metrics", "maintainability metrics", "SIL metrics", "PIL metrics", "what metrics are available", "assess quality", "coverage metrics", "generate metric report", "diagnose metric errors".Testare★ 1.3K
- slci-compatibility-analysismatlab/simulink-agentic-toolkitUse when you need to verify a Simulink model is compatible with SLCI code inspection, or to apply fixes for identified incompatibilities. Checks model configuration, identifies incompatibilities, and explains why each constraint is required for verification. Also invoked by slci-inspection-incompatibility-analysis to fix constraints and obtain compatibility results. Trigger keywords: checkCompatibility, SLCI compatibility, code inspection readiness, Model Advisor compatibility report.Inginerie★ 1.3K
- simulink-streaming-dspmatlab/simulink-agentic-toolkitBuilding or editing Simulink (.slx) models that stream signals in frames using DSP System Toolbox — audio, vibration, radar, comms. Use when the prompt names a Simulink block (Discrete FIR Filter, Buffer, Unbuffer, Rate Transition, Downsample, Upsample, Sample-Rate Converter, FIR Decimation, Time Scope, Spectrum Analyzer, From Multimedia File) or an action (frame-based processing, InputProcessing, buffering, overlap, windowing, STFT, short-time Fourier, decimate, downsample, upsample, resample, multirate, anti-aliasing, tunable filter). Prevents silent numerical errors from sample-vs-frame mismatch, wrong block choice, or missing anti-aliasing.Media★ 1.3K
- fix-sldv-incompatibilitymatlab/simulink-agentic-toolkitUse when a Simulink model is incompatible with Simulink Design Verifier (sldvcompat returns false, or an SLDV analysis errors out on an unsupported construct) and needs to be made analyzable. Diagnoses the incompatibility, applies the matching fix to a copy, and confirms the copy is compatible; optionally raises confidence the fix preserved behavior via a back-to-back consistency replay (agreement on the generated tests, not a proof of equivalence). Do NOT use for running test generation, design error detection, or requirement verification themselves — only for making a model compatible so those can proceed.Testare★ 1.3K
- simulating-simulink-modelsmatlab/simulink-agentic-toolkitConfigures Simulink simulations non-destructively using SimulationInput objects — parameter overrides without modifying the model, batch sweeps via parsim, custom input signals via Dataset, and simulation data retrieval via logsout. Use when running sim()/parsim() with setVariable, setBlockParameter, setExternalInput, or when performing parameter sweeps and multi-run analysis. Not needed for one-shot simulations without configuration.Altele★ 1.3K
Note și recenzii
—
nicio recenzie
Ai încercat acest skill? Notează-l ca să-i ajuți pe alții. Autentifică-te
Discuție
Intră în discuție. Autentifică-te