doca-comm-channel-admin
De la autor
Use this skill to enumerate host↔DPU DOCA comch (formerly Comm Channel) servers and connections via the shipped doca_comm_channel_admin binary — listing comch-capable devices and decoding the per-device server / connection table (server name, PID, in-use / max, PCIe address). The shipped binary is a SINGLE-SHOT SCAN-AND-PRINT tool with no registered arguments — NO list / inspect / drain / restart subcommands; one inventory pass over every comch-capable doca_dev on this side. Channel reset / drain / restart go to doca-comch (program side), doca-setup / doca-hardware-safety (driver reload), or BFB / RShim — NOT to this binary. Trigger on phrasings like "list comch servers", "which channels are active on this BlueField", or "verify admin tool sees same channel as program." Refuse and route elsewhere for the comch programming API, library install, protocol design, channel reset, or general orientation.
Instalare
npx skills add NVIDIA/skills --skill doca-comm-channel-admin -a claude-code
Se instalează în .claude/skills/doca-comm-channel-admin/ · Fiecare comandă descarcă skill-ul direct de pe GitHub cu utilitarul open source skills.
Identic octet cu octet cu commit-ul scanat, cu licența depozitului și un fișier SOURCE.txt.
Vrei ca agentul să-ți propună skill-uri în timp ce scrii? Vezi cum folosești skill-urile din IDE.
Verificări de siguranță pe SKILL.md
Niciun avertisment.
De ce 90
aiqbench calculează scorul de încredere din semnale publice. Nu este un audit de securitate, așa că citește un skill înainte să-l instalezi.
Skill-uri similare
Cele mai apropiate de acesta prin ce fac și când sunt folosite.
- doca-telemetry-utilsNVIDIA/skillsdoca_telemetry_utils command line on a host with DOCA: discover the diagnostic-counter schema, translate counter names to binary Data IDs and back, and check per-device counter support before committing a DOCA Telemetry exporter config. Start here when telemetry counters vanish between the exporter and the collector: "my exporter ships but the collector sees nothing", "this metric silently drops downstream", "which counters does this BlueField expose", "translate this 0x... back to a counter name", "what do node / pcie_index / depth mean here", or "is this counter supported on this device", even without naming the tool. Writing exporter or collector code belongs to doca-telemetry-exporter / doca-telemetry; DTS deployment to doca-dts; DOCA install or repair to doca-setup.DevOps★ 3.7K
- doca-capsNVIDIA/skillsUse this skill when the user wants to invoke the read-only doca_caps CLI to ask what DOCA sees on this host — listing DOCA devices and PCIe addresses, listing representor devices, asking which DOCA libraries are available on the current OS, checking per-device per-library capabilities, scoping output to a specific PCIe address, or capturing a side-effect-free capability snapshot for debug or install smoke-test. Trigger even when the user does not explicitly mention "doca_caps" or "capabilities print tool" — typical implicit phrasings include "what does DOCA actually see on this box", "is my BlueField PF visible to DOCA", "is Flow available on my RHEL host", "enumerate VF representors for pf0", "doca_caps: command not found", or "empty output for RDMA, is the tool broken". Refuse and route elsewhere for DOCA installation (doca-setup owns it; never walk the steps), library-internal capability matrices (Flow pipe creation, RDMA verbs features), streaming telemetry / DTS, or modifying the shipped binary.Testare★ 3.7K
- doca-bare-metal-deploymentNVIDIA/skillsRunning a DOCA-linked binary directly on the hardware, with no container or kubelet: on host x86 with a BlueField NIC over PCIe, or bare-metal on BlueField Arm. Use for launching and supervising it (direct, tmux, systemd), and when it "exits 1 right after launch", "systemd keeps restarting it", reports "no matching device on the BF", or the BlueField itself is unhealthy: "bfb-install exited 0 but DPU is dead", "ping 192.168.100.2 works but ssh fails", "host PFs aren't showing netdevs". Service containers under kubelet belong to doca-container-deployment. Covers PCI/NUMA/CPU/IRQ binding, co-tenant isolation (cgroup-v2/netns/numactl), a seven-layer error taxonomy, platform lifecycle (BFB install, RShim/TMFIFO, host PF rebind, post-BFB recovery) and a six-state BlueField lifecycle classifier. Destructive firmware burn / mlxconfig set requires explicit confirmation via doca-hardware-safety; library APIs, env prep, and build use other skills.DevOps★ 3.7K
- doca-mgmtNVIDIA/skillsUse this skill when the user is doing hands-on DOCA Management programming against BlueField / ConnectX devices — standing up a management or representor context (doca_mgmt_dev_ctx / doca_mgmt_dev_rep_ctx), querying device caps (data-direct, caps-general), toggling congestion-control global status, modifying diagnostics-data, setting ICM quotas, or issuing a raw firmware command via doca_mgmt_raw_cmd with the right scope (CONFIGURATION / DEBUG_READ_ONLY / DEBUG_WRITE / DEBUG_WRITE_FULL). Trigger even when the user does not say "DOCA Management" — typical implicit phrasings include "fleet tool that walks every BlueField and reads device state", "toggle data-direct on a VF", "set an ICM quota per representor", "send a raw firmware command from C", "DOCA_ERROR_IO_FAILED from raw_cmd", or "fwctl ioctl is failing". Refuse and route elsewhere for mlxconfig direct operation, BFB / firmware reflash, streaming telemetry, doca_caps CLI snapshots, or DOCA install itself — those belong to other skills.Inginerie★ 3.7K
- doca-dmsNVIDIA/skillsOperate NVIDIA DOCA Management Service on a BlueField, Arm/x86 host, or Kubernetes pod: from DOCA 3.5 the local `dms-cli` (one command per YANG path, no server), and the `dmsd` + `dmspe` service: choose deployment and authentication, configure `-allowed_users` and `dmsgroup`, use gNMI Get/Set/Subscribe, run supported gNOI workflows, and debug frontend/backend failures. Trigger even without "DMS" for "manage a remote BlueField over gRPC", "gNOI reboot from orchestrator", or fleet-management requests. SAFETY: reboot, OS install, factory-reset, and managed-file deletion are destructive and require target-bound explicit confirmation; never invoke them speculatively. Route installation and library/API build questions elsewhere, and route turnkey aggregation to the externally-productized DOCA Telemetry Service.DevOps★ 3.7K
- doca-telemetryNVIDIA/skillsUse this skill to read DOCA hardware-counter events from a `doca_dev` through the per-domain Telemetry reader libraries: `doca_telemetry_pcc`, `_dpa`, `_diag`, `_adp_retx`, `_phy`, and `_pci`. It covers capability checks, context creation, startup, and per-domain reads or samples. Trigger for implicit requests such as "read PCC counters from my BlueField app", "sample DPA counter exports", or "expose PHY, PCI, or DIAG counters from this doca_dev". This is the counter-reader surface, not a NetFlow, IPFIX, or local-socket collector. Route publishing and export to `doca-telemetry-exporter`; route the deployed DOCA Telemetry Service to `doca-dts`, and collectors and plain stdout logging elsewhere.DevOps★ 3.7K
Note și recenzii
—
nicio recenzie
Ai încercat acest skill? Notează-l ca să-i ajuți pe alții. Autentifică-te
Discuție
Intră în discuție. Autentifică-te