Sari la conținut

Română · beta. Traducerea a fost făcută automat și este încă în curs de revizuire. Citește pagina în engleză

perspectiva aiqbenchProduse AI

analiza aiqbench

This research presents a hierarchical framework that integrates reinforcement learning with robust adaptive control to enable safe, large-scale mobile robot navigation using stereo vision. By combining RL-based motion planning with actuator-level deep neural networks and safety supervisors, the approach addresses critical deployment challenges like mechanical limits and environmental disturbances without relying on risky exploration phases. The method demonstrates practical viability for heavy-duty robots operating in unstructured terrain while maintaining precise goal-reaching accuracy.
Sursă care acoperăarXiv
Ce este aceastaLectura unui model asupra articolului și a acoperirii conexe, scrisă pentru aiqbench. Nu sunt cuvintele publicației.

Vision-based Goal-Reaching Control for Mobile Robots Using a Hierarchical Learning Framework

arXiv3 min de cititArticolul și perspectiva sunt în engleză.

arXiv:2601.00610v2 Announce Type: replace Abstract: Reinforcement learning (RL) has strong potential in robotics, but exploration-based training complicates safe deployment on large-scale robots. For such applications, this paper proposes a novel hierarchical goal-reaching framework that integrates stereo visual pose estimation, constrained RL-based motion planning, actuator-level robust adaptive control (RAC), and supervisory safe-return logic. Stereo visual localization is used as the real-time pose-estimation interface with loop closing, map fusion, and relocalization. The RL planner generates smooth, feasible goal-reaching references using a problem-specific reward structure and motion constraints that promote goal progress, reduce oscillations, preserve vision-consistent smoothness, and respect the mechanical limits of a heavy skid-steered robot. At the actuation layer, a scaled conjugate-gradient (SCG)-trained deep neural network (DNN) approximates a quasi-static actuator feedforward map from wheel-speed data to nominal control input. This feedforward map is combined with a logarithmic-barrier-based RAC to compensate for residual modeling errors, slip-induced disturbances, and bounded mismatch between the nominal map and real actuator response. For the actuator-level wheel-tracking subsystem, uniformly ultimately bounded tracking with exponential convergence to a disturbance-dependent residual set is established under bounded uncertainty. A logarithmic safety supervisor monitors execution, detects unsafe operating conditions, including faults and localization inconsistencies, and switches the robot to safe-return mode. Experiments on a 6000 kg robot over asphalt and loose-soil terrain demonstrate approximately 3--4 cm final-position root mean square error (RMSE), accurate tracking of RL-generated commands, improved actuator-level performance over two RAC baselines, and successful autonomous recovery after fault injection.

Abstract:Reinforcement learning (RL) has strong potential in robotics, but exploration-based training complicates safe deployment on large-scale robots. For such applications, this paper proposes a novel hierarchical goal-reaching framework that integrates stereo visual pose estimation, constrained RL-based motion planning, actuator-level robust adaptive control (RAC), and supervisory safe-return logic. Stereo visual localization is used as the real-time pose-estimation interface with loop closing, map fusion, and relocalization. The RL planner generates smooth, feasible goal-reaching references using a problem-specific reward structure and motion constraints that promote goal progress, reduce oscillations, preserve vision-consistent smoothness, and respect the mechanical limits of a heavy skid-steered robot. At the actuation layer, a scaled conjugate-gradient (SCG)-trained deep neural network (DNN) approximates a quasi-static actuator feedforward map from wheel-speed data to nominal control input. This feedforward map is combined with a logarithmic-barrier-based RAC to compensate for residual modeling errors, slip-induced disturbances, and bounded mismatch between the nominal map and real actuator response. For the actuator-level wheel-tracking subsystem, uniformly ultimately bounded tracking with exponential convergence to a disturbance-dependent residual set is established under bounded uncertainty. A logarithmic safety supervisor monitors execution, detects unsafe operating conditions, including faults and localization inconsistencies, and switches the robot to safe-return mode. Experiments on a 6000 kg robot over asphalt and loose-soil terrain demonstrate approximately 3--4 cm final-position root mean square error (RMSE), accurate tracking of RL-generated commands, improved actuator-level performance over two RAC baselines, and successful autonomous recovery after fault injection.

Robotics (cs.RO)

arXiv:2601.00610 [cs.RO]

(or arXiv:2601.00610v2 [cs.RO] for this version)

https://doi.org/10.48550/arXiv.2601.00610 Focus to learn more arXiv-issued DOI via DataCite

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.

Text integral sub licența deschisă a publicației · 327 cuvinte

Subiecte conexe