Simple Torque-Observation Alignment for Zero-Shot Sim-to-Real Grasping with a Direct-Drive Gripper

arXiv:2609.29031v1 Announce Type: new Abstract: Torque observations in reinforcement learning remain challenging because simulated and measured torque differ in scale, offset, and noise. In this paper, we propose a simple torque observation alignment method for robots with direct-drive (DD) actuators, in which motor current maps linearly to joint torque through a motor-type-specific torque constant K_tau. First, dynamometer calibration identifies K_tau* and corrects the scale mismatch between simulated and real torque. Second, the method uses delta_tau(t) = tau(t) - tau(t-1) as the observation in both domains to eliminate the constant offset instead of using the direct torque tau(t), which carries a domain-dependent bias. Third, Gaussian noise obtained from the dynamometer measurement data is injected during the learning process. To validate the proposed method, we train a teacher-student grasping policy entirely in simulation and deploy the distilled student on a multifingered DD gripper. The deployed policy performs proprioceptive grasping using only joint positions and torque differences. We conduct an ablation study comparing the proposed method with alternative alignment variants on nine in-distribution (ID) objects. The proposed method achieves 100% grasp success. These results demonstrate that the proposed alignment method improves the robustness of zero-shot policy transfer on the DD gripper against real-world torque-observation mismatches.

Abstract:Torque observations in reinforcement learning remain challenging because simulated and measured torque differ in scale, offset, and noise. In this paper, we propose a simple torque observation alignment method for robots with direct-drive (DD) actuators, in which motor current maps linearly to joint torque through a motor-type-specific torque constant K_tau. First, dynamometer calibration identifies K_tau* and corrects the scale mismatch between simulated and real torque. Second, the method uses delta_tau(t) = tau(t) - tau(t-1) as the observation in both domains to eliminate the constant offset instead of using the direct torque tau(t), which carries a domain-dependent bias. Third, Gaussian noise obtained from the dynamometer measurement data is injected during the learning process. To validate the proposed method, we train a teacher-student grasping policy entirely in simulation and deploy the distilled student on a multifingered DD gripper. The deployed policy performs proprioceptive grasping using only joint positions and torque differences. We conduct an ablation study comparing the proposed method with alternative alignment variants on nine in-distribution (ID) objects. The proposed method achieves 100% grasp success. These results demonstrate that the proposed alignment method improves the robustness of zero-shot policy transfer on the DD gripper against real-world torque-observation mismatches.

Robotics (cs.RO)

arXiv:2609.29031 [cs.RO]

(or arXiv:2609.29031v1 [cs.RO] for this version)

https://doi.org/10.48550/arXiv.2609.29031 Focus to learn more arXiv-issued DOI via DataCite (pending registration)

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.

analiza aiqbench

Simple Torque-Observation Alignment for Zero-Shot Sim-to-Real Grasping with a Direct-Drive Gripper

Subiecte conexe