Reliable Piezoresistive Strain Sensing Through Physical Limits and Uncertainty Monitoring

arXiv:2608.15784v1 Announce Type: new Abstract: Soft piezoresistive strain sensors are one of the most common sensing solutions for wearable and soft robotic applications due to their flexibility and compliance. However, their resistance response is nonlinear and hysteretic, and a sensor can be pushed past its calibrated workspace or misbehave inside it, carrying that error into a decision or control loop. Probabilistic regressors track confidence but ignore those limits. A predictive mean can look unremarkable even when the reading comes from a sensor outside its admissible range or already failing internally, so a confident-looking estimate is not the same as a trustworthy one. This paper proposes a reliability framework pairing a physics-informed probabilistic inverse model, built on physics-guided input features, with a risk factor fusing uncertainty with strain and strain-rate limits into a three-state monitor. Tests on a Nitinol wire and a silver-coated polyamide thread with a Gaussian Process raised fit scores to 0.90-0.95 (RMSE 0.26%-0.15%) and a 96% empirical coverage against the 95% target. The monitor caught 95% of out-of-range and 100% of abnormal conditions while staying reliable under nominal operation. A sensor that reports confidence alongside its estimate lets a system withhold action instead, since it needs no labeled failure examples, which are hard to collect for soft materials.

Abstract:Soft piezoresistive strain sensors are one of the most common sensing solutions for wearable and soft robotic applications due to their flexibility and compliance. However, their resistance response is nonlinear and hysteretic, and a sensor can be pushed past its calibrated workspace or misbehave inside it, carrying that error into a decision or control loop. Probabilistic regressors track confidence but ignore those limits. A predictive mean can look unremarkable even when the reading comes from a sensor outside its admissible range or already failing internally, so a confident-looking estimate is not the same as a trustworthy one. This paper proposes a reliability framework pairing a physics-informed probabilistic inverse model, built on physics-guided input features, with a risk factor fusing uncertainty with strain and strain-rate limits into a three-state monitor. Tests on a Nitinol wire and a silver-coated polyamide thread with a Gaussian Process raised fit scores to 0.90-0.95 (RMSE 0.26%-0.15%) and a 96% empirical coverage against the 95% target. The monitor caught 95% of out-of-range and 100% of abnormal conditions while staying reliable under nominal operation. A sensor that reports confidence alongside its estimate lets a system withhold action instead, since it needs no labeled failure examples, which are hard to collect for soft materials.

Robotics (cs.RO)

arXiv:2608.15784 [cs.RO]

(or arXiv:2608.15784v1 [cs.RO] for this version)

https://doi.org/10.48550/arXiv.2608.15784 Focus to learn more arXiv-issued DOI via DataCite (pending registration)

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.

analiza aiqbench

Reliable Piezoresistive Strain Sensing Through Physical Limits and Uncertainty Monitoring

Subiecte conexe