analiza aiqbench
This paper adds a residual stiffening layer beneath an unmodified generative visuomotor policy, so the policy can complete contact-rich tasks that require overcoming friction. The method infers resistance from the gap between commanded and realized motion, without force sensing or retraining. The reported gains (52% to 90% success on two real tasks, with 61% less peak off-axis force) come from two hardware tasks and six resistance levels, so they are promising but still need broader validation.
Intent-guided Adaptive Stiffening for Visuomotor Policies under Unknown Resistance
arXiv:2610.18386v1 Announce Type: new Abstract: Manipulation tasks such as unscrewing a cap or sliding a part in contact with a surface require imposing force along a high-friction direction: the robot must overcome a resistance rather than yield to it. Generative visuomotor policies predict the motion for such tasks but not the authority needed to realize it, and that authority is bounded by the impedance controller beneath them: when the resistance exceeds what a compliant controller can exert under a bounded tracking error, the task is unattainable however accurate the prediction is. The required amount cannot be anticipated either, since it depends on a contact state the observation does not reveal. In this paper, we propose a residual stiffening layer placed underneath an unmodified policy. Resistance is recognized, without force sensing, from the mismatch between the motion the policy commands and the motion the robot realizes, and a four-mode supervisor raises the stiffness along a single direction read off the policy's own action chunk, retains it while the task progresses and releases it afterwards. The layer needs no compliance labels, no retraining and no re-collected demonstrations. On two real tasks, unscrewing a bottle cap and pushing a T-nut along a T-slot groove against non-homogeneous friction, evaluated at six resistance levels of which two were withheld from the demonstrations, the layer raises the success rate from 52% to 90% while producing 61% less peak off-axis force than a uniformly stiff controller at the same resistance.
Abstract:Manipulation tasks such as unscrewing a cap or sliding a part in contact with a surface require imposing force along a high-friction direction: the robot must overcome a resistance rather than yield to it. Generative visuomotor policies predict the motion for such tasks but not the authority needed to realize it, and that authority is bounded by the impedance controller beneath them: when the resistance exceeds what a compliant controller can exert under a bounded tracking error, the task is unattainable however accurate the prediction is. The required amount cannot be anticipated either, since it depends on a contact state the observation does not reveal. In this paper, we propose a residual stiffening layer placed underneath an unmodified policy. Resistance is recognized, without force sensing, from the mismatch between the motion the policy commands and the motion the robot realizes, and a four-mode supervisor raises the stiffness along a single direction read off the policy's own action chunk, retains it while the task progresses and releases it afterwards. The layer needs no compliance labels, no retraining and no re-collected demonstrations. On two real tasks, unscrewing a bottle cap and pushing a T-nut along a T-slot groove against non-homogeneous friction, evaluated at six resistance levels of which two were withheld from the demonstrations, the layer raises the success rate from 52% to 90% while producing 61% less peak off-axis force than a uniformly stiff controller at the same resistance.
Robotics (cs.RO)
arXiv:2610.18386 [cs.RO]
(or arXiv:2610.18386v1 [cs.RO] for this version)
https://doi.org/10.48550/arXiv.2610.18386 Focus to learn more arXiv-issued DOI via DataCite (pending registration)
arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.
Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.
Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.
Text integral sub licența deschisă a publicației · 331 cuvinte
Subiecte conexe

Netskope (NTSK) Q2 2027 Earnings Call Transcript
fool.com · 10 sept. 2026
The J-Space Debate, Agent Swarms, and Pacing Frontier AI - Digital Minds Newsletter #4
LessWrong · 18 sept. 2026
Brain-Conditioned Action Policies for Neural Motor Decoding
arXiv · 30 sept. 2026

Digital States 2026: AI Moves From Experiment to Infrastructure
govtech.com · 24 sept. 2026