Sari la conținut

Română · beta. Traducerea a fost făcută automat și este încă în curs de revizuire. Citește pagina în engleză

perspectiva aiqbenchProduse AI

analiza aiqbench

This research demonstrates a novel whole-body control framework enabling humanoid robots to pull heavy wheeled loads, effectively solving the coupled dynamics problem between the robot and passive vehicle. By distilling privileged training data into a history-conditioned policy, the system achieves stable gait synchronization and reduced actuation costs even with uncertain load interactions. The results validate that pulling payloads significantly lowers the cost of transport compared to unloaded walking, marking a practical step toward high-capacity humanoid logistics.
Sursă care acoperăarXiv
Ce este aceastaLectura unui model asupra articolului și a acoperirii conexe, scrisă pentru aiqbench. Nu sunt cuvintele publicației.

Humanoid Rickshaw Pulling: Whole-Body Locomotion under Coupled Wheeled Loads

arXiv3 min de cititArticolul și perspectiva sunt în engleză.

arXiv:2610.04238v1 Announce Type: cross Abstract: Humanoid robots could transport payloads substantially heavier than themselves by pulling passive wheeled vehicles instead of carrying the load. This capability, however, creates a coupled locomotion problem: the robot must maintain persistent upper-body contact while adapting to unknown, configuration-dependent forces arising from the payload, vehicle, and terrain. We present a whole-body control framework for humanoid rickshaw pulling that tracks commanded vehicle motion while preserving balance and stable grasps under uncertain load dynamics. During training, a privileged teacher exploits vehicle states, interaction forces, and load properties. Its actions and latent are distilled into a history-conditioned student that implicitly infers coupled dynamics from proprioceptive responses, followed by reinforcement-learning fine-tuning. Comparisons with \emph{No History} and \emph{Only History} baselines show that the resulting policy achieves accurate vehicle tracking while reducing vehicle oscillation, torso tilt, and actuation cost. Behavioral analysis shows that Unitree G1 propels the rickshaw and generates gait-synchronized whole-body reactions that stabilize its lateral and roll motions. Moreover, pulling redistributes joint effort and yields a lower robot-normalized cost-of-transport proxy than unloaded walking over most tested load--speed conditions. On hardware, a single policy performs starting, sustained pulling, turning, and stopping with both rigid payloads and human passengers, handling a loaded rickshaw mass of up to 115~kg without load-specific retuning. These results demonstrate robust heavy-load transportation through coordinated and persistent humanoid--vehicle interaction.

Abstract:Humanoid robots could transport payloads substantially heavier than themselves by pulling passive wheeled vehicles instead of carrying the load. This capability, however, creates a coupled locomotion problem: the robot must maintain persistent upper-body contact while adapting to unknown, configuration-dependent forces arising from the payload, vehicle, and terrain. We present a whole-body control framework for humanoid rickshaw pulling that tracks commanded vehicle motion while preserving balance and stable grasps under uncertain load dynamics. During training, a privileged teacher exploits vehicle states, interaction forces, and load properties. Its actions and latent are distilled into a history-conditioned student that implicitly infers coupled dynamics from proprioceptive responses, followed by reinforcement-learning fine-tuning. Comparisons with \emph{No History} and \emph{Only History} baselines show that the resulting policy achieves accurate vehicle tracking while reducing vehicle oscillation, torso tilt, and actuation cost. Behavioral analysis shows that Unitree G1 propels the rickshaw and generates gait-synchronized whole-body reactions that stabilize its lateral and roll motions. Moreover, pulling redistributes joint effort and yields a lower robot-normalized cost-of-transport proxy than unloaded walking over most tested load--speed conditions. On hardware, a single policy performs starting, sustained pulling, turning, and stopping with both rigid payloads and human passengers, handling a loaded rickshaw mass of up to 115~kg without load-specific retuning. These results demonstrate robust heavy-load transportation through coordinated and persistent humanoid--vehicle interaction.

Robotics (cs.RO); Machine Learning (cs.LG)

arXiv:2610.04238 [cs.RO]

(or arXiv:2610.04238v1 [cs.RO] for this version)

https://doi.org/10.48550/arXiv.2610.04238 Focus to learn more arXiv-issued DOI via DataCite (pending registration)

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.

Text integral sub licența deschisă a publicației · 313 cuvinte

Subiecte conexe