Sari la conținut

Română · beta. Traducerea a fost făcută automat și este încă în curs de revizuire. Citește pagina în engleză

perspectiva aiqbenchMachine learning

analiza aiqbench

This research presents a dual intrusion detection system leveraging quantized machine learning models to secure automotive CAN bus networks against cyberattacks with minimal latency and energy overhead. By optimizing lightweight LSTM and autoencoder architectures for FPGA deployment, the study addresses the critical need for resource-efficient AI in legacy vehicular systems without compromising detection accuracy.
Sursă care acoperăarXiv
Ce este aceastaLectura unui model asupra articolului și a acoperirii conexe, scrisă pentru aiqbench. Nu sunt cuvintele publicației.

Deep Defence on Wheels: A Dual Intrusion Detection System Architecture for Comprehensive In-Vehicle Network Security

arXiv3 min de cititArticolul și perspectiva sunt în engleză.

arXiv:2610.07489v1 Announce Type: cross Abstract: Increasing connectivity to the outside world and the lack of inbuilt security mechanisms have made legacy intra-vehicular networks vulnerable to cyberattacks. Initial research focused on maximising detection accuracy for known and unknown attacks, often using large, full-precision machine learning models. However, embedding IDSs into vehicular electronic systems also requires low detection latency, energy efficiency and minimal electronic control unit (ECU) resource overhead to process about 2,000 CAN frames/s. Lightweight models must balance accuracy with these deployment constraints. We propose a dual IDS framework comprising supervised and unsupervised learning-based solutions, each optimised for real-time, resource-constrained automotive platforms. A quantised LSTM-based IDS (QLSTM-IDS) achieves over 99.9% detection accuracy for DoS/Flooding, Fuzzing and Spoofing/Malfunction attacks using a single model architecture evaluated on two widely used datasets. The model is trained using the Brevitas quantisation-aware training library, transformed into a dataflow accelerator with custom blocks compatible with AMD's FINN toolchain, and synthesised using Vitis HLS. Complementing this, an 8-bit quantised convolutional autoencoder-based IDS (QCAE-IDS), quantised using AMD's Vitis-AI toolchain, detects previously unseen anomalies that alter CAN-ID sequence patterns with over 99% accuracy. An integration architecture enables both models to operate on a single FPGA, bridging the network interface IP and processing system to minimise software overhead. QLSTM-IDS achieves 0.25 ms inference latency and 0.8 mJ energy consumption per message, while QCAE-IDS achieves 0.42 ms and 1.1 mJ per block. Both solutions are deployed and evaluated on the ZCU104 SoC (XCZU7EV FPGA), demonstrating a flexible hardware/software co-design for real-time detection of known and unknown attacks on high-speed CAN buses.

Abstract:Increasing connectivity to the outside world and the lack of inbuilt security mechanisms have made legacy intra-vehicular networks vulnerable to cyberattacks. Initial research focused on maximising detection accuracy for known and unknown attacks, often using large, full-precision machine learning models. However, embedding IDSs into vehicular electronic systems also requires low detection latency, energy efficiency and minimal electronic control unit (ECU) resource overhead to process about 2,000 CAN frames/s. Lightweight models must balance accuracy with these deployment constraints. We propose a dual IDS framework comprising supervised and unsupervised learning-based solutions, each optimised for real-time, resource-constrained automotive platforms. A quantised LSTM-based IDS (QLSTM-IDS) achieves over 99.9% detection accuracy for DoS/Flooding, Fuzzing and Spoofing/Malfunction attacks using a single model architecture evaluated on two widely used datasets. The model is trained using the Brevitas quantisation-aware training library, transformed into a dataflow accelerator with custom blocks compatible with AMD's FINN toolchain, and synthesised using Vitis HLS. Complementing this, an 8-bit quantised convolutional autoencoder-based IDS (QCAE-IDS), quantised using AMD's Vitis-AI toolchain, detects previously unseen anomalies that alter CAN-ID sequence patterns with over 99% accuracy. An integration architecture enables both models to operate on a single FPGA, bridging the network interface IP and processing system to minimise software overhead. QLSTM-IDS achieves 0.25 ms inference latency and 0.8 mJ energy consumption per message, while QCAE-IDS achieves 0.42 ms and 1.1 mJ per block. Both solutions are deployed and evaluated on the ZCU104 SoC (XCZU7EV FPGA), demonstrating a flexible hardware/software co-design for real-time detection of known and unknown attacks on high-speed CAN buses.

Cryptography and Security (cs.CR); Hardware Architecture (cs.AR); Machine Learning (cs.LG)

arXiv:2610.07489 [cs.CR]

(or arXiv:2610.07489v1 [cs.CR] for this version)

https://doi.org/10.48550/arXiv.2610.07489 Focus to learn more arXiv-issued DOI via DataCite (pending registration)

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.

Text integral sub licența deschisă a publicației · 355 cuvinte

Subiecte conexe