analiza aiqbench
This research introduces a modular dual-camera pipeline for aerial micro-inspection that enhances drone robustness against disturbances without requiring close proximity to targets. By combining a zoomed inspection camera with a wide-field stereo navigation system, the system effectively handles non-structural objects like trees and vehicles in real-world scenarios. The open-source ROS 2 implementation offers a practical foundation for adapting micro-inspection workflows to diverse applications such as agricultural pest detection.
A Modular Dual-Camera Pipeline for Micro-Inspection Using Aerial Robots
arXiv:2606.11419v1 Announce Type: new Abstract: Most existing drone-based inspection systems require the drone to fly dangerously close to the target or follow complex flight paths to capture small details. In addition, drone flight is affected by disturbances and localization inaccuracies, which can cause the drone to lose sight of its supposed target when it has a narrow view. Furthermore, trajectory planning often requires prior information about the target's geometry, position, and orientation, which is not always available for non-structural targets such as trees, vehicles, or people. To address these challenges, this paper presents aerial_micro_inspection, a generic pipeline for aerial micro-inspection across different use cases. The pipeline assumes a PX4-powered drone equipped with two cameras: (i) a zoomed, gimbal-mounted inspection camera that captures fine details without requiring the drone to fly very close to the target, and (ii) a wide-field-of-view stereo navigation camera that acquires the target surface on site, estimates its range, and partitions it into smaller inspection regions. In addition, a vision-based feedback loop compensates for drone motion while the inspection camera visits small partitions of a larger surface. We evaluate the pipeline in simulation and real-world experiments, mainly in two use-case scenarios: tree inspection for detecting oak processionary caterpillars and their eggs, and greenhouse inspection of sticky traps for detecting whiteflies. The results show improved coverage robustness under drone disturbances in simulation, as well as effective detection of caterpillars and eggs and high-detail imaging of insects in real-world experiments. The pipeline is open-source, developed in ROS 2, and can be adapted to new applications by replacing the surface-segmentation and micro-target detection checkpoints. The code is available at: https://github.com/SaxionMechatronics/aerial_micro_inspection
Abstract:Most existing drone-based inspection systems require the drone to fly dangerously close to the target or follow complex flight paths to capture small details. In addition, drone flight is affected by disturbances and localization inaccuracies, which can cause the drone to lose sight of its supposed target when it has a narrow view. Furthermore, trajectory planning often requires prior information about the target's geometry, position, and orientation, which is not always available for non-structural targets such as trees, vehicles, or people. To address these challenges, this paper presents aerial_micro_inspection, a generic pipeline for aerial micro-inspection across different use cases. The pipeline assumes a PX4-powered drone equipped with two cameras: (i) a zoomed, gimbal-mounted inspection camera that captures fine details without requiring the drone to fly very close to the target, and (ii) a wide-field-of-view stereo navigation camera that acquires the target surface on site, estimates its range, and partitions it into smaller inspection regions. In addition, a vision-based feedback loop compensates for drone motion while the inspection camera visits small partitions of a larger surface. We evaluate the pipeline in simulation and real-world experiments, mainly in two use-case scenarios: tree inspection for detecting oak processionary caterpillars and their eggs, and greenhouse inspection of sticky traps for detecting whiteflies. The results show improved coverage robustness under drone disturbances in simulation, as well as effective detection of caterpillars and eggs and high-detail imaging of insects in real-world experiments. The pipeline is open-source, developed in ROS 2, and can be adapted to new applications by replacing the surface-segmentation and micro-target detection checkpoints. The code is available at: this https URL
Robotics (cs.RO)
arXiv:2606.11419 [cs.RO]
(or arXiv:2606.11419v1 [cs.RO] for this version)
https://doi.org/10.48550/arXiv.2606.11419 Focus to learn more arXiv-issued DOI via DataCite (pending registration)
arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.
Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.
Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.
Text integral sub licența deschisă a publicației · 360 cuvinte
Subiecte conexe
Neural 3D Object Reconstruction with Small-Scale Unmanned Aerial Vehicles
arXiv · 2 sept. 2026

Vertical Advantage: Transforming Industries with Lakebase and Agentic AI
Databricks · 27 aug. 2026

Utilizing AMD Schola and UnrealRoboticsLab with AMD ROCm™ Software to Train a Robotic Arm
AMD · 17 iun. 2026

Inside NVIDIA Halos for Robotics: A Full-Stack Functional Safety System for Physical AI
NVIDIA · 22 iun. 2026